详细信息

Flame-Retardant Materials Based on Phosphorus-Containing Polyhedral Oligomeric Silsesquioxane and Bismaleimide/Diallylbisphenol A with Improved Thermal Resistance and Dielectric Properties  ( SCI-EXPANDED收录 EI收录)  

文献类型:期刊文献

英文题名:Flame-Retardant Materials Based on Phosphorus-Containing Polyhedral Oligomeric Silsesquioxane and Bismaleimide/Diallylbisphenol A with Improved Thermal Resistance and Dielectric Properties

作者:Wang, Zheng[1];Wu, Wei[1];Zhong, Yuhua[1];Ruan, Mingzhu[1];Hui, Lin Lin[1]

机构:[1]E China Univ Sci & Technol, Sch Mat Sci & Engn, Sino German Joint Res Ctr Adv Mat, Shanghai 200237, Peoples R China

年份:2015

卷号:132

期号:9

外文期刊名:JOURNAL OF APPLIED POLYMER SCIENCE

收录:;EI(收录号:20144900296330);WOS:【SCI-EXPANDED(收录号:WOS:000345829400018)】;

语种:英文

外文关键词:flame retardance; resins; thermosets

摘要:Polyhedral oligomeric silsesquioxane containing 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DP) was used to flame-retard 4,4-bismaleimidophenyl methane (BDM)/2,2-dially bisphenol A (DBA) resins, and the integrated properties of the resins were investigated. The fire resistance of BDM/DBA resins containing DP was analyzed by limiting oxygen index (LOI) and vertical burning (UL94) tests. The results show that DP increased the LOI of the resins from 25.3 to 38.5%. The BDM/DBA resins were evaluated to have a UL-94 V-1 rating, which did not satisfy the high standards of industry. On the other hand, BDM/DBA containing DP achieved a UL-94 V-0 rating. The thermal stability and char formation were studied by thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy. TGA and scanning electron microscopy-energy-dispersive X-ray spectrometry measurements demonstrated that the DP resulted in an increase in the char yield and the formation of the thermally stable carbonaceous char. The results of Raman spectroscopy showed that the DP enhanced the graphitization degree of the resin during combustion. Moreover, the modified BDM/DBA resins exhibited improved dielectric properties. Specifically, the dielectric constant and loss at 1 MHz of the BDM/DBA/15% DP resin were 3.11 and 0.008, respectively, only about 93 and 73% of those of the BDM/DBA resin. All of the investigations showed that DP was an effective additive for developing high-performance resins with attractive flame-retardant and dielectric properties. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41545.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心