详细信息
以MCM-22为原料合成高水热稳定性的介孔材料 ( SCI-EXPANDED收录 EI收录)
Synthesis of Mesoporous Materials with High Hydrothermal Stability from MCM-22
文献类型:期刊文献
中文题名:以MCM-22为原料合成高水热稳定性的介孔材料
英文题名:Synthesis of Mesoporous Materials with High Hydrothermal Stability from MCM-22
作者:刘子玉[1];朱子彬[1];王仁远[2];朱学栋[1]
机构:[1]华东理工大学工业大型反应器教育部工程研究中心,上海200237;[2]上海宝钢化工有限公司技术中心,上海200942
年份:2008
卷号:29
期号:9
起止页码:928
中文期刊名:催化学报
外文期刊名:CHINESE JOURNAL OF CATALYSIS
收录:CSTPCD;;EI(收录号:20085011776755);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000260196700018)】;北大核心:【北大核心2004】;CSCD:【CSCD2011_2012】;
基金:中国博士后科学基金面上资助项目.
语种:中文
中文关键词:MCM-22;介孔材料;水热稳定性;后处理
外文关键词:MCM-22 ; mesoporous material; hydrothermal stability; post-synthetic treatment
摘要:以合成的微孔分子筛MCM-22为原料,将其与表面活性剂及氢氧化钠-起回流溶解,再调节溶液的pH值至7~9,使MCM-22转化为高水热稳定性的介孔材料.所得介孔材料具有蠕虫状的均匀孔道,骨架中不含有MCM.22的微观结构单元.该介孔材料至少含有18%的表面活性剂,经823K焙烧脱除表面活性剂后,其孔径为2.2nm,比表面积为1038m2/g,孔容为0.97cm3/g.焙烧后的介孔材料具有非常高的水热稳定性,经沸水回流100h后其比表面积为896m2/g,孔容为0.90cm3/g,孔径为2.1nm,即使经过300h的回流,该材料仍能保持698m。/g的比表面积和0.90cm3/g的孔容.固体29SiMASNMR结果表明,该介孔材料的高水热稳定性与其高表面缩合度有关.
A microporous zeolite MCM-22 was synthesized and transferred to mesoporous materials with high hydrothermal stability by refluxing MCM-22 with surfactant in the presence of NaOH followed by adjusting the pH to 7-9. The obtained material exhibited uniform wormhole mesopores while had no primary structural units of MCM-22 in the mesoporous framework. The as-synthesized mesoporous material contained at least 18 % surfactant, which can be removed by calcination at 823 K. The calcined mesoporous material had a pore diameter of 2.2 nm, a BET specific surface area of 1 038 m2/g, and a pore volume of 0.97 cm3/g. The calcined mesoporous materials exhibited excellent hydrothermal stability. After being refluxed in boiling water for 100 h, the material remained a BET specific surface area of 896 m2/g, a high pore volume of 0.90 cm3/g, and a pore diameter of 2.1 nm. Even after refluxing for 300 h, a high BET specific surface area of 698 m2/g and a high pore volume of 0.90 cm3/g could still be obtained. The remarkable hydrothermal stability of this mesoporous material was due to its highly polymerized pore walls ascribed by solid-state 29Si MAS NMR.
参考文献:
正在载入数据...
