文献类型：期刊文献

中文题名：低损耗193nm增透膜

英文题名：Low-loss 193nm anti-reflection coatings

作者：尚淑珍[1];邵建达[2];范正修[2]

机构：[1]华东理工大学机械与动力工程学院承压系统安全科学教育部重点实验室,上海200237;[2]中国科学院上海光学精密机械研究所,上海201800

年份：2008

卷号：57

期号：3

起止页码：1946

中文期刊名：物理学报

外文期刊名：Acta Physica Sinica

收录：CSTPCD;;EI(收录号：20081611207445);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000254097000109)】；北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：上海市重点学科建设项目(批准号:B503)资助的课题~~

语种：中文

中文关键词：193nm增透膜;光学损耗;剩余反射率;设计;热舟蒸发方法

外文关键词：193 nm, AR coatings, optical loss, reflection

摘要：计算了适用于193nm增透膜设计与制备的基底与薄膜材料的光学常数,并在此基础上对193nm增透膜进行了设计、制备与性能分析.发现基底材料的吸收损耗对增透膜元件的影响很大,超过一定值时,增透膜元件的设计透过率将达不到理想水平.对单面增透膜的设计与制备结果表明,当吸收损耗降低到一定程度,散射损耗成为不可忽略的因素.采用热舟蒸发方法实现了性能良好的193nm减反射膜,剩余反射率在0.2%以下.
The optical constants suitable for designing and depositing 193nm AR coatings were calculated, and 193nm AR coatings were designed, produced and characterized on the basis of the calculated results. It was found that the extinction loss of the substrate material had such an important effect that when it was beyond a certain level the designed transmittance could not reach the ideal value. The designed and manufactured results of the single-surface AR coatings revealed that scattering loss began to play the key role when the absorbance loss decreased to a certain extent. High performance 193nm AR coatings with residual reflectance lower than 0.2% have been prepared by the resistant boat evaporation method.