文献类型：期刊文献

中文题名：电解法原位合成锰氧化物处理模拟含锶放射性废水

英文题名：Treatment of simulated radioactive Sr^(2+)-containing wastewater by electrolysis of in-situ synthesis of manganese oxide

作者：袁海峰[1];邵利锋[1];黄立[1];黄光团[1]

机构：[1]华东理工大学资源与环境工程学院给水与用水处理技术研究室,上海200237

年份：2019

卷号：39

期号：1

起止页码：82

中文期刊名：工业水处理

外文期刊名：Industrial Water Treatment

收录：CSTPCD;;北大核心:【北大核心2017】；CSCD:【CSCD_E2019_2020】；

语种：中文

中文关键词：原位合成;电解法;含锶放射性废水

外文关键词：in situ synthesis;electrolysis;radioactive Sr^2+-containing wastewater

摘要：以88Sr作为模拟非放射性同位素,对电解法原位合成锰氧化物处理模拟核电厂放射性废水中Sr^(2+)的工艺条件进行了研究。考察了电解电压、反应时间、反应结束后搅拌时间、温度以及pH对出水Sr^(2+)质量浓度的影响,并通过正交试验得出最佳反应条件。结果表明,在模拟废水Sr^(2+)初始质量浓度为5 mg/L条件下,最佳工艺条件:电解电压为7 V,反应温度为50℃,pH为10,电解时间为30 min,电解结束后搅拌时间为20 min,此条件下出水残余Sr^(2+)为0.264 mg/L。在最佳工艺条件下,经XRD分析沉渣为Mn3O4。整个电解过程符合零级动力学,拟合动力学方程为ct=c0-0.159 1t。
The research on the technological conditions for the treatment of simulated radioactive Sr^2+-containing wastewater in a nuclear power plant by electrolysis of in-situ synthesis of manganese oxide has been accomplished,using 88Sr as simulated nonradioactive isotope.The influences of electrolysis voltage,reaction time,stirring time,temperature and pH on the mass concentration of Sr^2+in effluent have been investigated,and the reaction conditions obtained by orthogonal tests.The results show that when the initial mass concentration of Sr^2+in the simulated wastewater is 5 mg/L,the optimal technological conditions are as follows,the electrolysis voltage is 7 V,reaction temperature is 50℃,pH is 10,electrolysis time is 30 min,and after finishing the electrolysis process the stirring time is 20 min.Under these conditions,the concentration of residual Sr^2+in the effluent is 0.264 mg/L.Under optimal conditions,the sediment analyzed by means of XRD is Mn3O4.The whole electrolysis process conforms to zero order kinetics,and the fitting kinetics equation is ct=c0-0.159 1t.