文献类型：期刊文献

中文题名：洗涤冷却环内液体冷态流动行为数值模拟

英文题名：Numerical simulation of cold state liquid flow in scrubbing-cooling ring

作者：颜留成[1];王亦飞[1];王灵萍[1];潘飞[1];郭强强[1];于广锁[1]

机构：[1]煤气化及能源化工教育部重点实验室,华东理工大学洁净煤技术研究所,上海200237

年份：2014

卷号：65

期号：8

起止页码：2927

中文期刊名：化工学报

外文期刊名：CIESC Journal

收录：CSTPCD;;EI(收录号：20143700063798);Scopus;北大核心:【北大核心2011】；CSCD:【CSCD2013_2014】；

基金：国家重点基础研究发展计划项目(2010CB22700)

语种：中文

中文关键词：计算流体力学;数值模拟;湍流;洗涤冷却环;速度分布

外文关键词：CFD;numerical simulation;turbulent flow;scrubbing-cooling ring;velocity distribution

摘要：为了研究洗涤冷却环内冷却水流动的情况,借助计算流体力学软件Fluent建立了洗涤冷却环流体冷态流动的数学模型,同时为了验证模型的可靠性,对洗涤冷却环出口处的流动情况进行了实验研究,实验结果与模拟结果基本吻合。结果表明:因为洗涤冷却环的结构限制,其内部存在多处涡旋区域;内室入水口周向位置处的涡旋运动最为剧烈;受其影响,入水口周向位置的射流孔出口平均速度最小,两入水口之间周向位置的射流孔出口平均流速最大;槽缝出口的平均流速在周向上的分布与射流孔出口平均流速分布相同。
In order to investigate the flow behavior of cooling water in scrubbing-cooling ring,especially at the outlet of the ring,a mathematical model for the fluid flow in scrubbing-cooling ring was established with Fluent,a software of computational fluid dynamics.The experimental study was carried out to measure the average velocity at the outlet of scrubbing-cooling ring to verify the mathematical model.The velocity of jet hole and slot was obtained from experiment and simulation.The numerical simulation result fits the experimental result well.It suggests that vortex exists inside the scrubbing-cooling ring because of the structure of the ring.The motion of vortex is most violent along the circumference of inlet in the inner chamber,so that the average outlet velocity of jet hole at the circumference of inlet is the minimum and the velocity at the circumferential position between two inlets is the maximum.The distribution of average outlet velocity of slot at circumferential position is the same with that of jet hole.