详细信息

基于跟踪微分器的骨骼服阻抗控制方法    

Exoskeleton Suit′s Impedance Control Based on Tracking Differentiator

文献类型:期刊文献

中文题名:基于跟踪微分器的骨骼服阻抗控制方法

英文题名:Exoskeleton Suit′s Impedance Control Based on Tracking Differentiator

作者:杨智勇[1,2];曹恒[3];顾文锦[4];杨秀霞[4];凌正阳[3]

机构:[1]海军航空工程学院战略导弹工程系;[2]海军航空工程学院研究生一队,山东烟台264001;[3]华东理工大学机械与动力工程学院,上海200237;[4]海军航空工程学院控制工程系,山东烟台264001

年份:2009

卷号:35

期号:6

起止页码:926

中文期刊名:华东理工大学学报(自然科学版)

外文期刊名:Journal of East China University of Science and Technology

收录:CSTPCD;;Scopus;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;

基金:国家自然科学基金(60705030;50775072)

语种:中文

中文关键词:骨骼服;阻抗控制;人机结合;跟踪微分器

外文关键词:exoskeleton suit impedance control human-machine tracking differentiator

摘要:将阻抗控制方法引入骨骼服的控制中,利用人机之间安装的多维力/力矩传感器的测量信息来估计参考轨迹。针对由于普通差分方法引起噪声放大,使得参考速度和参考加速度不可用的问题,利用两级跟踪微分器获得包含测量噪声情况下的光滑的参考速度和参考加速度信号,从而实现所设计的阻抗控制。该方法能控制骨骼服跟随人体运动,同时保持人体对骨骼服的作用力最小,减轻人体的能量消耗。采用该方法对人体负荷情况下的蹲起动作进行仿真实验,仿真结果验证了所设计控制器的有效性和可行性,以及对人体刚度参数估计不准和负荷变化具有一定的鲁棒性。
An impedance control method is introduced for the control of exoskeleton suit.It uses multidimensional force/torque sensors installed between the exoskeleton and the pilot to estimate the reference trajectory.Because common difference method will amplify the noise and make the reference velocity and acceleration signal deteriorate,two serial tracking differentiators are used to get the smooth signals(referenced velocity and acceleration) and realize the designed impedance control method.The method can be applied to control the exoskeleton suit to follow the pilot′s motion and minimize the interaction force as well as decrease the pilot′s power consumption.Simulation of the crouch and stand motion when the pilot carries heavy load is made.The simulation results show the validity and feasibility of the designed controller.At the same time,the controller is robust to the variation of the estimated human stiffness and the load.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心