文献类型：期刊文献

中文题名：碳纳米管的等离子体功能化及其聚苯胺复合材料的制备

英文题名：Functionization of carbon nanotubes by plasma and their compositing with polyaniline

作者：张捷[1,2];杨俊和[2];贾润萍[3];王霞[2];黄婕[1]

机构：[1]华东理工大学化工学院,上海200237;[2]上海理工大学材料学院,上海200093;[3]上海应用技术学院材料工程系,上海200233

年份：2010

卷号：25

期号：4

起止页码：291

中文期刊名：新型炭材料

外文期刊名：New Carbon Materials

收录：CSTPCD;;EI(收录号：20103813251722);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000281534800009)】；北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：National Natural Science Foundation of China (50273020, 50473064, 50773040); Science and Technology Commission of Shanghai Municipality (065212048) and Shanghai Leading Academic Discipline Project (P1502)

语种：中文

中文关键词：CNTs;等离子体;PANI;原位聚合;复合材料

外文关键词：Carbon nanotubes; Plasma; Polyaniline; Insitu polymerization; Composites

摘要：采用等离子体技术对碳纳米管(CNTs)功能化,而后与苯胺原位聚合制备CNTs/聚苯胺(PANI)复合材料。电导测试结果表明:相对于CNTs的强酸氧化法(0.936S/cm),等离子体处理更易获得高电导率的复合材料(2.86S/cm)。相应的最佳等离子体工艺参数为:处理功率50W、时间5min、压力0.08Torr、温度110℃、磁场线圈电流0.08A及电极距离5cm。SEM观察发现:聚合后,CNTs的光滑表面转变成粗糙结构,同时管径增加了80nm。XRD、FTIR及Raman结果均证实:PANI被均匀包覆于CNTs的表面。
Carbon nanotubes （CNTs） were modified by Ar plasma followed by O2 etching in a plasma assisted chemical vapor deposition apparatus. The modified CNTs were polymerized with aniline in a HCl aqueous solution to produce CNT/polyaniline composites. The CNTs modified by the plasma have a higher conductivity （2.86S/cm） than those modified by acid oxidation （0.936S/cm）. The optimum plasma parameters were power （50W）, system pressure （0.08torr）, treatment time （5min）, temperature （110℃）, distance between two electrodes （5cm） and current of magnetic loop （0.8A）. SEM results revealed that the smooth surface of the CNTs became rough after the plasma modification and the diameters increased by about 80 nm. FTIR, Raman and XRD all revealed the presence of polyaniline on CNT surfaces.