文献类型：期刊文献

中文题名：晶化温度对介孔材料SBA-15结构与形貌的影响

英文题名：Effect of Crystallization Temperature on Structure and Morphology of Mesoporous SBA-15

作者：周丽绘[1];张利中[2];刘洪来[1]

机构：[1]华东理工大学化学系,先进功能材料与制备教育部重点实验室,上海200237;[2]华东理工大学分析测试中心,上海200237

年份：2006

卷号：6

期号：3

起止页码：499

中文期刊名：过程工程学报

外文期刊名：The Chinese Journal of Process Engineering

收录：CSTPCD;;EI(收录号：2006289999298);Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金资助项目(编号:20236010;20476025;20490200);上海市教委资助项目

语种：中文

中文关键词：P123;合成;晶化温度;介孔氧化硅SBA-15

外文关键词：P123 surfactant; synthesis; crystallization temperature; mesoporous SBA-15

摘要：以P123嵌段共聚物表面活性剂为模板剂,在不同晶化温度下合成了不同孔径和比表面积的六方相介孔氧化硅SBA-15,通过XRD,SEM,N2吸附-脱附及TEM等手段系统考察了不同晶化温度对SBA-15晶胞参数、比表面积、孔径及形貌的影响,得到反应最佳晶化温度为120℃.随着晶化温度的升高,SBA-15的孔径增大,比表面积下降,团聚体颗粒打开形成散落短棒状.同时还对温度影响SBA-15结构和形貌的机理进行了探讨.
Highly ordered hexagonal mesoporous SBA-15 with different pore sizes and BET surface areas was prepared under different crystallization temperatures, using nonionic triblock P 123 as template. By means of XRD, SEM, N2 adsorption-desorption and TEM, the effects of crystallization temperature on morphology, surface area and pore size of SBA-15 were investigated. The results indicate that the best crystallization temperature is about 120℃. With increasing of crystallization temperature, the pore size of SBA-15 is increased and BET surface area decreased. When the crystallization temperature is 140℃ or higher, SEM images reveal that the morphology of SBA-15 is changed from ＂wheat-like＂ agglomerate particles to ＂banana-like＂ short rods. These results are discussed further in terms of the synthesis mechanism of SBA-15 and structure characteristics of P123 surfactant.