文献类型：期刊文献

中文题名：聚丙烯复合材料防护罩研制

英文题名：Preparation of Engine Shield from Polypropylene Composites

作者：祈国俊[1];张广平[2];李中兵[1];闫国红[1];潘敏[2]

机构：[1]奇瑞汽车有限公司汽车工程研究院,安徽芜湖241009;[2]华东理工大学化学工程联合国家重点实验室,上海200237

年份：2006

卷号：20

期号：3

起止页码：75

中文期刊名：中国塑料

外文期刊名：China Plastics

收录：CSTPCD;;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：国家863项目(2005A331010)

语种：中文

中文关键词：聚丙烯;玻璃纤维;防护罩;力学性能

外文关键词：polypropylene： glass fiber： engine shield： mechanical property

摘要：分别以玻纤毡、玻纤毡/纳米碳酸钙及长玻纤作为增强物制得了三种聚丙烯复合材料,并通过流动模塑试制了汽车发动机防护罩。结果表明:三种热塑性复合材料片材与制品具有优异的力学性能,拉伸强度、弯曲强度、模量和冲击强度分别大于60 MPa、100 MPa、3 500 MPa和50 kJ／m2,热变形温度158℃左右。制品面内玻纤分布均匀,热稳定性好。由热塑性复合材料制得的制品较热固性片状模塑料制备的制品质量减少35％以上。热塑性复合材料中以长玻纤增强聚丙烯的流动性最好、得到的制品质量最轻。
Polypropylene composites were manufactured by adding the reinforcements of glass mat, glass mat/nanometer-sized CaCO3, and long glass fiber to polypropylene respectively, and a type of engine shield was compression molded with above materials. The results show that the thermoplastic sheets and the flow molded parts have superior mechanical properties, that is, tensile strength, flexural strength, modulus and impact strength are greater than 60 MPa, 100 MPa, 3 500 MPa and 50 kJ/m^2 respectively. Their hot deflection temperature is about 158 ℃ and the in-plane distribution of glass fiber is uniform. The weight of thermoplastic engine shield is decreased by 35 % compared to that of SMC shield.