文献类型：期刊文献

中文题名：BNi-2/0Cr18Ni9钎焊接头高温蠕变行为的试验研究及数值模拟

英文题名：Experimental research and numerical simulation on creep behavior of brazed joint at high temperature

作者：陈建钧[1];史进[2];涂善东[1];轩福贞[1];王正东[1]

机构：[1]华东理工大学机械与动力工程学院,上海200237;[2]国家锅炉压力容器检测研究中心,北京100013

年份：2006

卷号：27

期号：3

起止页码：39

中文期刊名：焊接学报

外文期刊名：Transactions of The China Welding Institution

收录：CSTPCD;;EI(收录号：2006249938110);Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金资助项目(50225517;50505012);上海市启明星资助项目(05QMX1416)

语种：中文

中文关键词：钎焊;蠕变;损伤;有限元;搭接接头

外文关键词：brazing;creep;damage;finite element method;lap joint

摘要：对600℃下铸态钎料BN i-2和不锈钢母材0Cr18N i9进行蠕变试验,基于双参数法对试验数据回归,拟合得到了蠕变损伤模型中所需的材料常数。利用耦合蠕变损伤有限元法对钎焊搭接接头进行数值模拟,计算结果与试验数据相一致,验证了采用损伤方法研究高温钎焊接头的可行性。最后通过有限元计算分析了高温服役条件下搭接钎焊接头危险区域的分布及延长其服役寿命的措施。
A series of creep tests were performed on nickel-based brazing filler BNi-2 and parent metal stainless steel 0Cr18Ni9 at 600℃.A simplified method was used to regress the test results and obtain the material constants required in creep damage analysis.The finite element method coupled with the damage constitutive equation was employed to investigate the creep behavior of the lap brazed joint.The simulation results appeared close agreement to the experimental data,which indicated the feasibility to employ damage approach to study the mechanical behavior of brazed joint at high temperature.The hazard region of the lap brazed joint was analyzed by the numerical simulation and some suggestions to design brazed joint against creep failure were also presented.