详细信息

茂金属/有机硼化物催化体系催化1-癸烯聚合    

Polymerization of 1-decene Catalyzed by Metallocene/Organic Boron Catalytic System

文献类型:期刊文献

中文题名:茂金属/有机硼化物催化体系催化1-癸烯聚合

英文题名:Polymerization of 1-decene Catalyzed by Metallocene/Organic Boron Catalytic System

作者:江洪波[1];樊宗明[1];雪小峰[1]

机构:[1]华东理工大学石油加工研究所,上海200237

年份:2015

卷号:31

期号:4

起止页码:359

中文期刊名:化学反应工程与工艺

外文期刊名:Chemical Reaction Engineering and Technology

收录:CSTPCD;;Scopus;北大核心:【北大核心2014】;CSCD:【CSCD_E2015_2016】;

语种:中文

中文关键词:1-癸烯;茂金属;有机硼化物;聚α-烯烃

外文关键词:1-decene;;metallocene;;organic boron;;poly-α-olefins

摘要:采用茂金属催化体系Ph_2C(Cp-9-Flu)ZrCl_2/C_6H_5NH(CH_3)_2B(C_6F_5)_4/Al(~iBu)_3催化1-癸烯聚合,考察了催化剂浓度、Al和Zr以及有机硼化物和Zr物质的量之比、反应温度和反应时间等工艺条件对产物的影响,并采用核磁共振对其产物与1-癸烯在Ph_2C(Cp-9-Flu)ZrCl_2/MAO催化下聚合产物的结构进行了分析比较。结果表明:在Zr和1-癸烯物质的量之比为10×10^(-5),硼化物和Zr物质的量之比为1.5,Al和Zr物质的量之比为100,反应温度为60℃的条件下,反应时间120 min,1-癸烯的转化率为93.6%,运动黏度(100℃)为3 684 mm^2/s,黏度指数为367,数均分子量为2.9×10~4,分子量分布为1.85;聚合时单体主要进行1,2插入,产生亚乙烯基端基。
Polymerization of 1-decene catalyzed by Ph2C(Cp-9-Flu)ZrCl2/C6H5NH(CH3)2B(C6H5)4/Al(iBu)3 catalyst system was studied. Effects of catalyst concentration, molar ratio of Al to Zr, molar ratio of origanic boranes(B) to Zr, reaction temperature and reaction time on polymer properties were investigated, and the polymers from 1-decene catalyzed by the Ph2C(Cp-9-Flu)ZrCl2/MAO catalyst system and Ph2C(Cp-9-Flu)ZrCl2/ C6H5NH(CH3)2B(C6H5)4/Al(iBu)3 catalyst system were characterized by means of nuclear magnetic resonance(NMR). The results showed that under the conditions of molar ratio of Zr to 1-decene 10×10-5, molar ratio of Al to Zr 100, reaction temperature 60℃ and reaction time 120 min, the conversion of 1-decene reached 93.6% and the kinematic viscosity (100℃) was 3 684 mm2/s, the viscosity index was 367, the number-average molecular weight (Mn) was 2.9×104, and the molecular weight distribution was 1.85. The polymerization reaction was mainly 1,2-insertion which produced vinylene end group.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心