文献类型：期刊文献

中文题名：一种高速剪切搅拌器内流场的研究

英文题名：Study of the Flow in a High Shear-Rate Mixer

作者：杨金龙[1];赖焕新[1];于新海[1];涂善东[1]

机构：[1]华东理工大学承压系统与安全教育部重点实验室,上海200237

年份：2013

卷号：34

期号：6

起止页码：1065

中文期刊名：工程热物理学报

外文期刊名：Journal of Engineering Thermophysics

收录：CSTPCD;;EI(收录号：20132716471110);Scopus;北大核心:【北大核心2011】；CSCD:【CSCD2013_2014】；

基金：国家科技支撑计划项目(No.2009BAF40B02);国家自然科学基金项目(No.51176048)

语种：中文

中文关键词：高速剪切;搅拌器;静转子;PIV测量;数值模拟

外文关键词：high shear-rate; mixer; stator-rotor; PIV measurement; numerical simulation

摘要：本文采用PIV测量技术结合数值模拟方法,研究一种高速剪切搅拌器内的三维流场,着重对垂直搅拌与斜搅拌两种搅拌轴安装方式的流场进行稳态和非稳态的模拟。数值计算的平均流场与实验良好吻合,都显示了斜搅拌有利于减小搅拌罐内流动低速区。非稳态模拟的结果表明,搅拌头附近明显的射流作用、静子齿缝处湍动能的耗散和搅拌头附近较大的周向压力梯度,增强了搅拌器的分散作用。
This paper presents a study of the 3-D flow in a mixer,which uses the high shear-rate between the stator and rotor for decentralization;and the mixer is designed for preparation of catalyst slurry for fuel cells.PIV measurements and numerical simulations are carried out,with main attentions paid to both the steady and unsteady simulations for vertically and obliquely positioned agitators.The numerical results agree well with the experimental data,both of which have unveiled the smaller low-speed flow region for the obliquely positioned agitator.Jet flows near the agitator, high turbulent energy dissipation in the gap of stator/rotator and high circumferential pressure gradient near the mixer head are observed.All of these factors contribute to the decentralization.