文献类型：期刊文献

中文题名：进口参数对旋流器分离性能的影响（英文）

英文题名：Effect of inlet configuration on hydrocyclone performance

作者：唐波[1];许妍霞[1];宋兴福[1];孙泽[1];于建国[1]

机构：[1]华东理工大学国家盐湖资源综合利用工程技术研究中心,上海200237

年份：2017

卷号：27

期号：7

起止页码：1645

中文期刊名：Transactions of Nonferrous Metals Society of China

外文期刊名：中国有色金属学报（英文版）

收录：CSTPCD;;EI(收录号：20173204028769);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000410593400022)】；CSCD:【CSCD2017_2018】；

基金：Project (2011AA06A107) supported by the National High Technology Research and Development Program of China; Project (2014M551348) supported by China Postdoctoral Science Foundation; Project (51504098) supported by the National Natural Science Foundation of China

语种：中文

中文关键词：水力旋流器;进口参数;分离精度;计算流体力学

外文关键词：hydrocyclone; inlet configuration; separation sharpness; computational fluid dynamics

摘要：进口参数是影响水力旋流器分级性能的重要因素,研究两者之间的影响规律具有重要意义。基于计算流体力学方法,以各种进口直径和进口速度的组合为研究对象,考察了进口参数对于精确分级的影响效应。结果显示:高分级精度的实现需要组合特定的进口直径和进口速度。过大的进口直径和过快的进口速度会降低分级精度。当进口直径过大时,由于短路流的显著影响,粗颗粒底流回收效率下降严重。流场分析发现原因是溢流管区域流体流动混乱程度的增加以及压力梯度的增强。与此同时,进口速度过快会导致细颗粒受到较大的离心力,引起溢流分离效率的降低。
Inlet configuration is important parameter of hydrocyclones,which has great impact on the classification performance.The effects of inlet configuration on the precise classification were studied by computational fluid dynamics under variouscombinations of inlet diameter and inlet velocity.The results showed that a high sharpness of classification was achieved withspecific inlet diameter and inlet velocity.The separation efficiency of the coarse particles by underflow significantly decreased wheninlet had an oversize diameter owing to a stronger short-circuit flow.It is resulted from the chaotic flow and the stronger pressuregradient around the vortex finder.Meanwhile,a low separation efficiency of the fine particles by overflow was achieved when inletvelocity was high,which indicated a low sharpness caused by the overlarge centrifugal force.