文献类型：期刊文献

英文题名：Explosion and Flame Characteristics of Methane/Air Mixtures in a Large-Scale Vessel

作者：Zhang, Bo[1,2];Bai, Chunhua[2];Xiu, Guangli[1];Liu, Qingming[2];Gong, Guangdong[2]

机构：[1]E China Univ Sci & Technol, State Environm Protect Key Lab Environm Risk Asse, Shanghai 200237, Peoples R China;[2]Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China

年份：2014

卷号：33

期号：4

起止页码：362

外文期刊名：PROCESS SAFETY PROGRESS

收录：;WOS:【SCI-EXPANDED(收录号:WOS:000345361800010)】；

基金：This work was supported by Fundamental Research Funds for the Central Universities (222201314030); Shanghai Postdoctoral Sustentation Fund, China (13R21411800); The Project of State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology (KFJJ15-03M).

语种：英文

外文关键词：methane; air; explosion characteristics; flame propagation; large-scale vessel; safety

摘要：In this study, experiments of explosions and flame characteristics in methane/air mixtures are performed in a 10-m(3) vessel. Pressure gauges and a high-speed camera are utilized to record the pressure trajectories and the flame propagation process of ignition growth. The experimental results show that the maximum value of overpressure and the maximum rate of the explosion pressure rise are 0.596 MPa and 1.82 MPa/s for the methane (9.5% in volume)/air mixture at atmospheric conditions, respectively. Both values are higher than for other mixtures with different compositions. The results also indicate that the overpressure from the large-scale vessel in this study is lower than that of a smaller apparatus (e.g., 5-L closed cylindrical vessel). This difference occurs due to the cooling effect and because the reflected sonic disturbances by the vessel wall affect the explosion process and weaken the energy during the pressure attenuation stage, thus rendering the value of overpressure in the large-scale apparatus lower than in the tiny cylindrical vessels. The maximum overpressure is observed at 0.75 m for C=7% (C means the methane concentration) and 9.5% but at 1.3 m for C=5%, 6.5%, 11.2%, and 13%. These results indicate that methane/air is an easier means to generate overpressure and that the overpressure is higher near the stoichiometric condition. Based on the analysis of the flame propagation process, the mean value of the flame speed of methane (C=9.5%)/air is calculated to be approximately 2.43 m/s because the nonuniformity of the chemical reaction at the flame front results in a maximum fluctuation of flame speed of approximately 28.5%. The flame thickness () of methane (C=9.5%)/air fluctuates between 9.84 and 10.95 mm, with a mean value of 10.53 mm. (c) 2014 American Institute of Chemical Engineers Process Saf Prog 33: 362-368, 2014