详细信息

Preparation, characterization and permeation property of Al2O3, Al2O3-SiO2 and Al2O3-kaolin hollow fiber membranes  ( EI收录)  

文献类型:期刊文献

英文题名:Preparation, characterization and permeation property of Al2O3, Al2O3-SiO2 and Al2O3-kaolin hollow fiber membranes

作者:Han, Ling-Feng[1,2]; Xu, Zhen-Liang[1,2]; Cao, Yue[2]; Wei, Yong-Ming[2]; Xu, Hai-Tao[2]

机构:[1] State Key Laboratory of Chemical Engineering, East China University of Science and Technology [ECUST], 130 Meilong Road, Shanghai 200237, China; [2] Membrane Science and Engineering RandD Lab, Chemical Engineering Research Center, ECUST, 130 Meilong Road, Shanghai 200237, China

年份:2011

卷号:372

期号:1-2

起止页码:154

外文期刊名:Journal of Membrane Science

收录:EI(收录号:20111313875681)

语种:英文

外文关键词:Alumina - Aluminum oxide - Fibers - Sintering - Solid state reactions - Kaolin - Permeation - Pore size - Spinning (fibers) - Mullite - Membranes

摘要:Al2O3, Al2O3-SiO2 and Al2O3-kaolin hollow fiber precursors were prepared by a wet-spinning method using polyethersulfone (PES), Al2O3, SiO2 and kaolin. The hollow fiber membranes were obtained after a preheating and sintering combining process. These inorganic hollow fiber membranes had been characterized by SEM, XRD, porosity, density, mechanical property, permeation property and the mean/maximum pore size as well as pore size distribution, to investigate the effects of SiO2 and kaolin on α-Al2O3 hollow fiber membranes. The morphology of precursors depended on the particle contents and PES concentrations in the dispersion, and the final structure of sintered membranes were controlled by the precursors. XRD results showed that Al2O3 remained as α-Al2O3 before and after being sintered while SiO2 changed from tridymite to cristobalite from ambient temperature to 1450°C, and at higher temperature it would react with Al2O3 to produce the stoichiometric 3:2 mullite (3Al2O3·2SiO2, or Al6Si2O13) by solid state reaction. The effect of SiO2 and kaolin on the membrane properties depended on both the ratio of Al2O3:SiO2/kaolin and the sintering temperature. Moreover, when sintering temperature was 1600°C, Al2O3-kaolin-5 (Al2O3:kaolin=1:1) achieved a mean pore size of about 0.5μm. ? 2011 Elsevier B.V.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心