详细信息
Cr(acac)_3/Ph_2PN(~tBu)PPh_2/MAO催化乙烯高选择性齐聚的动力学研究
Kinetics of ethylene selective oligomerization over Cr(acac)_3/Ph_2PN(~tBu)PPh_2/MAO catalyst system
文献类型:期刊文献
中文题名:Cr(acac)_3/Ph_2PN(~tBu)PPh_2/MAO催化乙烯高选择性齐聚的动力学研究
英文题名:Kinetics of ethylene selective oligomerization over Cr(acac)_3/Ph_2PN(~tBu)PPh_2/MAO catalyst system
作者:朱祥峰[1];程瑞华[1];孙任[1];刘霖[1];刘柏平[1]
机构:[1]华东理工大学化工学院化学工程国家重点实验室,上海市200237
年份:2018
卷号:35
期号:5
起止页码:5
中文期刊名:合成树脂及塑料
外文期刊名:China Synthetic Resin and Plastics
收录:CSTPCD;;Scopus;北大核心:【北大核心2017】;
基金:国家自然科学基金(21174037)
语种:中文
中文关键词:动力学;乙烯齐聚;乙烯四聚;1-己烯;1-辛烯
外文关键词:kinetics;ethylene oligomerization;ethylene tetramerization;1-hexene;1-octene
摘要:对乙酰丙酮铬[Cr(acac)_3]/二-(二苯基膦)叔丁胺[Ph_2PN(~tBu)PPh_2]/甲基铝氧烷(MAO)催化体系高选择性催化乙烯齐聚生成1-己烯/1-辛烯的动力学进行了研究。系统考察了催化剂浓度、乙烯压力和反应温度对反应活性及产物选择性的影响,并采用Aspen Plus软件建模计算乙烯在液相中的溶解度,对该体系进行了动力学模拟。结果表明:催化剂浓度对反应活性及选择性影响不大,最优的反应压力是3.5 MPa,最优的反应温度是45℃;该乙烯齐聚反应体系对催化剂浓度的反应级数是1.16,对乙烯浓度的反应级数是1.74;当温度为30~45℃,压力为2.0~3.5 MPa时,该反应的表观活化能为73.7 k J/mol。
The experimental kinetics of ethylene oligomerization for 1-hexene/1-octylene over the Crbased catalyst system comprising chromium triacetylacetonate(Cr(acac)3),bis(diphenylphosphino)tertbutylamine(Ph2PN(tBu)PPh2)as ligand,and methylaluminoxane(MAO)as cocatalyst were investigated.The influence of catalyst concentration,ethylene pressure,and reaction temperature on the reaction activity and selectivity were systematically observed.The kinetic behavior of this catalyst system were simulated and the solubility of ethylene in liquid phase was established by Aspen Plus.The results show that the concentration of the catalyst contributes little to the reactivity and selectivity of the reaction,the optimal reaction pressure is 3.5 MPa and the reaction temperature is 45℃.The dependency of the reaction on catalyst concentration is the order of 1.16,and that on the ethylene concentration is the order of 1.74.The apparent activation energy of the reaction is 73.7 kJ/mol within 30-45℃and 2.0-3.5 MPa.
参考文献:
正在载入数据...
