文献类型：期刊文献

中文题名：聚甲基丙烯酸甲酯-干酪素/天然胶乳改性膜的制备及性能

英文题名：Preparation and properties of polymethyl methacrylate-casein/natural rubber latex modified film

作者：段俊超[1];田晓慧[1];王淑仪[1];孙金煜[1];元以中[1]

机构：[1]华东理工大学材料科学与工程学院,上海200237

年份：2017

卷号：40

期号：2

起止页码：126

中文期刊名：合成橡胶工业

外文期刊名：China Synthetic Rubber Industry

收录：CSTPCD;;Scopus;北大核心:【北大核心2014】；CSCD:【CSCD_E2017_2018】；

基金：中央高校基本科研业务费资助项目(22A201514002)

语种：中文

中文关键词：天然胶乳;干酪素;聚甲基丙烯酸甲酯;改性膜;力学性能;耐溶剂性;核-壳结构

外文关键词：natural rubber latex; casein; poly-methyl methacrylate ; modified film ; mechanicalproperty; solvent resistance; core-shell structure

摘要：采用无皂乳液聚合法,将聚甲基丙烯酸甲酯(PMMA)与干酪素(CA)接枝共聚形成PMMACA乳液,并以乳液共混的方法用其改性天然胶乳(NRL)。结果表明,PMMA-CA乳液粒子呈核-壳结构,粒径分布较窄,平均粒径约为100 nm。当PMMA-CA乳液的质量分数为12%时,PMMA-CA/NRL改性膜表面平整光滑,孔洞完全消失;力学性能最佳,拉伸强度为30.47 MPa,与NRL膜相比扯断伸长率变化不大。PMMA-CA/NRL改性膜在非极性溶剂环己烷和石油醚中的耐溶剂性较NRL膜有大幅提高。
Polymethyl methacrylate （PMMA） -ca-sein （CA） emulsion was prepared by the graft copolymerization of PMMA and CA using surfactant- free emulsion polymerization. And the natural rubber latex （NRL） was modified with PMMA-CA using emulsion blend method. The results showed that the microstructure of PMMA-CA particles exhibited core- shell structure and narrow size distribution, the average particle size was 100 nm. When the mass fraction of PMMA-CA was 12%, the surface of PMMA-CA/NRL modified film was flat and smoothand the holes disappeared completely. And the me- chanical properties of the modified film was the best, the tensile strength was 30.47 MPa, and the elongation at break changed little compared to NRL film. The solvent resistance to nonpolar solvent cyclohexane and petroleum ether of PMMA-CA/NRL modified film improved markedly compared to NRL film.