文献类型：期刊文献

中文题名：气流式雾化过程的有限随机分裂模型

英文题名：Finite stochastic breakup model of air-blast atomization process

作者：龚欣[1];刘海峰[1];李伟锋[1];陈谋志[1];秦军[1];于广锁[1];王辅臣[1];于遵宏[1]

机构：[1]华东理工大学资源与环境工程学院,上海200237

年份：2005

卷号：56

期号：5

起止页码：786

中文期刊名：化工学报

外文期刊名：CIESC Journal

收录：CSTPCD;;EI(收录号：2005269184707);Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：国家重点基础研究发展规划(2004CB217703);国家高技术研究发展计划 (2003AA521021);上海市科技发展基金项目 (03QF14013)~~

语种：中文

中文关键词：雾化;喷嘴;气流式;滴径分布;随机分裂

外文关键词：Mathematical models;Nozzles;Particle size analysis;Probability

摘要：滴径分布是描述喷嘴雾化性能的一个重要指标. 从液滴分裂的自相似性出发, 提出了描述气流式雾化过程的液滴有限随机分裂模型. 实验和模拟计算结果表明, 该模型能较好地模拟三通道喷嘴气流式雾化过程的平均滴径和滴径分布的非线性关系.
Droplet size distribution is an important parameter of atomization process. The finite stochastic breakup model of air-blast atomization process with four parameters: initial droplet diameter, diameter of maximum stable droplet, minimum mass ratio of a sub-droplet to the mother droplet and droplet breakup probability is presented according to the self-similarity of droplet breakup. The simulation results of droplet size distribution with this model agreed well with the experimental results of a three-channel nozzle with air and water, obtained by Malvern Laser Particle Sizer Type 3600 measurement. With this model, the nonlinear relationship between average droplet diameters and droplet size distribution of the air blast atomization process could be predicted satisfactorily.