详细信息

鼓泡床中分布器对气泡行为影响的电容层析成像分析    

Electrical Capacitance Tomography Analysis of Gas Distributors on Bubble Behavior in a Bubble Column

文献类型:期刊文献

中文题名:鼓泡床中分布器对气泡行为影响的电容层析成像分析

英文题名:Electrical Capacitance Tomography Analysis of Gas Distributors on Bubble Behavior in a Bubble Column

作者:黄子宾[1];程振民[1]

机构:[1]华东理工大学化工学院,化学工程联合国家重点实验室,上海200237

年份:2009

卷号:35

期号:1

起止页码:1

中文期刊名:华东理工大学学报(自然科学版)

外文期刊名:Journal of East China University of Science and Technology

收录:CSTPCD;;Scopus;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;

基金:国家自然科学基金(20876043);上海市科委07DJ14002项目资助

语种:中文

中文关键词:电容层析成像;气含率;准三维图像;气体分布器

外文关键词:electrical capacitance tomography; gas holdup; quasi-3d image; gas sparger;

摘要:采用英国Process Tomography有限公司研制的12电极双面电容层析成像(ECT)系统,研究了不同的分布器结构对鼓泡床气泡行为的影响。结果表明:在相同的表观气速下,随着分布器开孔数目的增多,气含率相应增加;随着表观气速的增加,气含率逐渐上升;当分布器具有泡罩结构时,对应的气含率较高。借助Plot3d考察了气泡上升过程中的准三维结构,发现气泡(群)的上升过程近似一种螺旋运动。
The twin-plane 12-electrode ECT(Electrical Capacitance Tomography) from Process Tomography Limited (UK) was employed to investigate the effect of different gas spargers on bubble behavior in a bubble column. The gas holdup increases with the increase of the number of orifices in the sparger and the superficial gas velocity. When the sparger has a bubble cap, the gas holdup becomes high. The quasi- 3d flow structure of bubbles was observed using Plot3d which showed that the bubbles perform a spiral motion along the wall.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心