文献类型：期刊文献

中文题名：苯乙烯反应挤出过程模拟及数值计算

英文题名：Simulation of the Reactive Extrusion Process of Styrene in a Modular Intermeshing Co-rotating Twin Screw Extruder

作者：烟伟[1];张昭[2];徐云[2];郑安呐[3];刘洪来[1]

机构：[1]华东理工大学化学系;[2]新疆大学数学系,乌鲁木齐830046;[3]华东理工大学材料科学与工程学院,上海200237

年份：2004

卷号：30

期号：4

起止页码：414

中文期刊名：华东理工大学学报（自然科学版）

外文期刊名：Journal of East China University of Science and Technology

收录：CSTPCD;;EI(收录号：2004458452506);Scopus;北大核心:【北大核心2000】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金资助项目(50290091;20025618;20236010);上海市教委资助项目

语种：中文

中文关键词：苯乙烯;反应挤出;双螺杆反应器;模拟

外文关键词：styrene; reactive extrusion process; twin screw extruder; simulation

摘要：在SHL-Φ35型自洁式、同向旋转双螺杆挤出机上进行了以丁基锂为引发剂的阴离子聚合苯乙烯反应挤出实验。采用静态实验法得到物料在螺杆结构中的填充度分布,在此基础上用平板模型对反应挤出过程进行了模拟。对沿螺杆轴向反应转化率,以及反应热、耗散热、机筒导热等热传递现象所致的温升进行了数值计算,计算结果与苯乙烯反应挤出实验结果比较,符合良好。
Modeling of chemical reactions in a modular intermeshing co-rotating twin-screw extruder is described. This method was applied to the simulation of the anionic bulk polymerization of styrene. Calculations were made for specific modular screw configuration, where both screw elements and kneading disc blocks were included. Reaction conversion and temperature rise were calculated along the screw axis. Good agreement between simulation and experimental results was obtained.