文献类型：期刊文献

中文题名：油滴在旋流分离中的相间滑移数值模拟

英文题名：Numerical Simulation of Oil-Water Separation in Hydrocyclones Using Algebraic Slip Mixture Model

作者：白志山[1];汪华林[1]

机构：[1]华东理工大学化工机械研究所

年份：2006

卷号：32

期号：11

起止页码：1355

中文期刊名：华东理工大学学报(自然科学版)

外文期刊名：Journal of East China University of Science and Technology(Natural Science Edition)

收录：CSTPCD;;Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：上海市科学技术发展基金项目（02DZ12098）.致谢：本文写作定稿得到了长江学者特聘教授涂善东博士的指导帮助,在此表示衷心的感谢!

语种：中文

中文关键词：水力旋流器;计算流体力学;分离效率;数值模拟;滑移

外文关键词：hydrocyclone; computational fluid dynamics（CFD）; separating efficiency; numerical sim- ulation ; slip

摘要：为了研究旋流管的分离性能,应用计算流体力学(CFD)方法对旋流管内的旋转湍流流场进行了数值模拟,获得旋流管内的浓度分布、滑移速度和粒级效率曲线。计算结果显示:随着进口流量的增大,粒级效率逐渐增大;在旋流管进口流量为2.0 m3/h时,20μm油滴颗粒大部分被分离出来;粒级效率与实验结果进行对比,验证数值模拟分离效率结果的可靠性和准确性。分析结果表明:数值模拟结果和实验数据基本一致。
Computational fluid dynamics （CFD） method was used to simulate the flow fields inside hydrocyclone in order to improve its separation efficiency. The RSM （Rreynolds stress model） turbulent model, which abandons the isotropic eddy-viscosity hypothesis, was used to analyze the oil-water twophase flow in the hydrocyclone, combined with the ASM （algebraic slip mixture model） model of oil droplets. The well-known SIMPLE algorithm combined with the PSIC method was adopted. Simulation of the separating performance was done for three-cone geometrical configurations of hydrocyclones. The concentration distribution, slip velocity and grade efficiency curve were given. Simulation result shows that an increase in feed flow rate can improve the grade efficiency. When the inlet flow rate is 2.0 m^3/h, 20 μm oil droplet are almost separated from water. Predicted separating performance is in good agreement with those obtained by tests.