详细信息

Microstructure and enhanced electromagnetic wave absorbing performance of Zn0.6Ni0.3Cu0.1Fe2O4 ferrite glass-ceramic  ( SCI-EXPANDED收录 EI收录)  

文献类型:期刊文献

英文题名:Microstructure and enhanced electromagnetic wave absorbing performance of Zn0.6Ni0.3Cu0.1Fe2O4 ferrite glass-ceramic

作者:Feng, Hao[1];Huang, Jianguo[1];Wang, Xiaoyang[1];Li, Jinfeng[1];Yin, Xiangchun[1];Xu, Zehao[1];Xiong, Kaiwen[1]

机构:[1]East China Univ Sci & Technol, Sch Mat Sci & Engn, 130 Meilong Rd, Shanghai 200237, Peoples R China

年份:2022

卷号:48

期号:7

起止页码:9090

外文期刊名:CERAMICS INTERNATIONAL

收录:;EI(收录号:20215111353462);WOS:【SCI-EXPANDED(收录号:WOS:000777797000003)】;

基金:This work was supported by the Project of the National Natural Science Foundation of China (contract grant number 52072123).

语种:英文

外文关键词:Glass-ceramics; Spinel; Ferrite; Electromagnetic wave absorption

摘要:Here we introduce a controllable route for the efficient synthesis of Zn0.6Ni0.3Cu0.1Fe2O4 ferrite glass-ceramic with enhanced electromagnetic wave (EMW) absorbing performance. By adding a certain amount of Zn, Ni, Cu and Fe oxides into the SiO2-Al2O3-B2O3-CaO-R2O glass system, the microstructure of three-dimensional dendritic ferrites combined with amorphous SiO2-rich phase is constructed through a high-temperature melt and quenching route. The good EMW absorption performance is attributed to the unique combination of amorphous glass and spinel ferrite, which improves the impedance matching of the material and absorbs EMW by the dielectric loss and magnetic loss. Moreover, the dendritic ferrite crystal phase is compounded with the SiO2-rich amorphous phase to form grain boundaries and crystal-amorphous interfaces, which enhances the interfacial polarization and builds multiple transmission-absorption mechanisms. The results show that the reflection loss peak value of the glass-ceramics containing 60 wt% Zn0.6Ni0.3Cu0.1Fe2O4 spinel is-42.16 dB with the sample thickness of 2 mm, and the effective absorption band range (reflection loss & LE;-10 dB) is 3.76 GHz (13.6-17.36 GHz) at 1.5 mm. This approach presents a scalable and low-cost solution that may be applied to the design of high-efficiency EMW consumption components in the future.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心