详细信息
Hydrophilic microporous PES membranes prepared by PES/PEG/DMAc casting solutions ( SCI-EXPANDED收录 EI收录)
文献类型:期刊文献
英文题名:Hydrophilic microporous PES membranes prepared by PES/PEG/DMAc casting solutions
作者:Li, Jing-Feng[1];Xu, Zhen-Liang[1];Yang, Hu[1];Feng, Cui-Ping[1];Shi, Jiang-Huan[1]
机构:[1]E China Univ Sci & Technol, Chem Engn Res Ctr, State Key Lab Chem Engn, Shanghai 200237, Peoples R China
年份:2008
卷号:107
期号:6
起止页码:4100
外文期刊名:JOURNAL OF APPLIED POLYMER SCIENCE
收录:;EI(收录号:20081211163462);WOS:【SCI-EXPANDED(收录号:WOS:000252815300084)】;
语种:英文
外文关键词:poly(ether sulfones); membranes; phase separation; morphology
摘要:Microporous poly(ether sulfones) (PES) membranes were prepared via phase inversion using poly (ethylene glycol) (PEG) as additive and N,N-dimethylacetamide (DMAc) as solvent. Thermodynamic of the casting solutions was studied by coagulation value while precipitation rate was observed by light transmittance measurement. It was found that casting solution with PEG200 as additive was thermodynamically less stable than those with PEG400 and PEG600 as additive and easier to cause phase separation in exposure time. With the increase of PEG200 concentration, the casting solution became thermodynamically less stable and easier to cause phase separation in exposure time, but precipitation rate during immersion precipitation decreased because of the increased viscosities. ATR-FTIR spectra and TGA curves showed that the membranes prepared using PEG200 as additive had less PEG residual than those of PEG400 and PEG600, but it showed better permeation performance than that prepared using PEG400 and PEG600 as additive. With the increase of PEG200 concentration from 30 to 70 wt %, the cross section structure changed from macrovoid to sponge-like, micropores with a mean pore size around 0.1 mu m began to form on the top surface. When the PEG200 concentration is 60 wt %, the pure water flux was 1845 L M 2 h(-1) bar, which is the highest value. As the PEG200 concentration increased from 30 to 60 wt %, the contact angles decreased from 82.1 degrees to 58.2 degrees. As the addition amount of PEG200 increased, the residual PEG made the prepared membranes more hydrophilic. (c) 2007 Wiley Periodicals, Inc.
参考文献:
正在载入数据...
