文献类型：期刊文献

中文题名：基于AMESim的平整机推上伺服系统建模与仿真

英文题名：Modeling and Stimulation of the Push-up Servo System in Skinpass Mill Based on AMESim

作者：周为民[1];王炜[2];孙波[2];董如金[1];王挺[1];曹恒[2]

机构：[1]宝山钢铁股份有限公司,上海201900;[2]华东理工大学机械与动力工程学院,上海200237

年份：2011

卷号：39

期号：8

起止页码：62

中文期刊名：机床与液压

外文期刊名：Machine Tool & Hydraulics

收录：CSTPCD;;北大核心:【北大核心2008】；

基金：国家自然科学基金资助项目(50775072)

语种：中文

中文关键词：平整机;推上伺服;建模;仿真;AMESim

外文关键词：Skinpass mill; Push-up servo; Modeling; Simulation; AMESim

摘要：为了提高某冷轧厂连退机组平整机液压推上伺服系统试车的可靠性和成功率,应用AMESim 8a软件建立了平整机液压推上伺服系统的模型,通过虚拟实验确定合理参数,减少试车参数整定的不确定性,并对系统压靠过程动态工作特性进行了仿真分析。试验结果表明仿真数据与实测数据基本一致。所建立的仿真模型具有实际参考价值,为控制系统参数的优化提供了重要依据。
To improve reliability and success rate of test-drive of hydraulic push-up servo system in skinpass mill on continual anneal line at some cold rolling factory,the model of hydraulic push-up servo system was established by AMESim 8A for ascertaining parameters and decreasing uncertainty of adjusting parameter of test-drive in the process of virtual experiment.Simultaneously,simulation analysis on dynamic performance of roller rest in system was developed.Experimental result indicates that simulation data accord with actual measurements,so the established model has made sense for practical reference,and supplied with important basis for optimization design on parameters of control system.