文献类型：期刊文献

英文题名：Measurement of small rotation angle of flange joints by a novel flexure magnifying mechanism

作者：Zheng, Xiaotao[1];Wei, Fen[1];Chen, Haofeng[2,3];Guo, Sujuan[3];Xuan, Fuzhen[3]

机构：[1]Wuhan Inst Technol, Hubei Prov Key Lab Chem Equipment Intensificat &, Wuhan 430205, Hubei, Peoples R China;[2]Univ Strathclyde, Dept Mech & Aerosp Engn, Glasgow G1 1XJ, Lanark, Scotland;[3]East China Univ Sci & Technol, Sch Mech Engn, MOE, Key Lab Pressure Syst & Safety, 130 Meilong St,POB 402, Shanghai 200237, Peoples R China

年份：2019

卷号：145

起止页码：244

外文期刊名：MEASUREMENT

收录：;EI(收录号：20192307017368);WOS:【SCI-EXPANDED(收录号:WOS:000474703500027)】；

基金：This work was financially supported by the National Natural Science Foundation of China (51828501 and 51305310).

语种：英文

外文关键词：Flexure magnifying mechanism; Flange joints; Measurement; Rotation angle; Leakage rate

摘要：Bolted flange joints are indispensable components in process industries due to the good sealing, assemble and disassemble capacities. Generally, the flange rigidity characterized by the rotation angle is a key index to evaluate the sealing tightness of flange joints. However, the rotation angle of flange is usually too small (less than 1 degrees) to monitor during the assemble and operation stages. Accordingly, a novel flexure magnifying mechanism is designed to measure the small rotation angle of flange joints under internal pressure and external bending moment. The magnification factor and calculation approach of the flexure amplification mechanism are deduced and verified by experimental data and finite element simulation. Results indicate that the proposed measuring apparatus has good performance to monitor the maximum rotation angle. It is of great interest that the measured location of the maximum rotation angle is in good agreement with that in the experiment, and the average error is 7.3%, which is acceptable for practical application. Additionally, the leakage rate at the top of flange joints slowly and almost linearly increases with the increment of external bending moment ascribing to the decrease the gasket stress near the top of flange joints. (C) 2019 Elsevier Ltd. All rights reserved.