详细信息
降低催化裂化汽油烯烃过程中操作条件对汽油组成的影响 ( EI收录)
Effect of Operation Conditions on the Compositionof Gasoline during the Process of Decreasing FluidCatalytic Cracking Gasoline Olefin
文献类型:期刊文献
中文题名:降低催化裂化汽油烯烃过程中操作条件对汽油组成的影响
英文题名:Effect of Operation Conditions on the Compositionof Gasoline during the Process of Decreasing FluidCatalytic Cracking Gasoline Olefin
作者:欧阳福生[1];赵旭红[1];翁惠新[1]
机构:[1]华东理工大学石油加工研究所,上海200237
年份:2005
卷号:31
期号:2
起止页码:157
中文期刊名:华东理工大学学报(自然科学版)
外文期刊名:Journal of East China University of Science and Technology
收录:CSTPCD;;EI(收录号:2005209110082);Scopus;北大核心:【北大核心2004】;CSCD:【CSCD2011_2012】;
语种:中文
中文关键词:操作条件;催化裂化;汽油烯烃;催化剂;辛烷值
外文关键词:operation condition; fluid catalytic cracking; gasoline olefin; catalyst; octane number
摘要:考察了使用降烯烃催化剂GOR-Q和使用常规催化剂MLC-500时操作条件对催化汽油组成和催化汽油研究法辛烷值的影响。结果表明:GOR-Q催化剂具有明显减少催化汽油烯烃(主要为小分子烯烃)含量的效果。操作条件对催化汽油烯烃、芳烃和异构烷烃含量产生较大影响。对于降烯烃催化剂GOR-Q,控制反应温度520°C以下、剂油比(m(催化剂)∶m(原料油))不小于7时有利于降低催化汽油烯烃含量,但在反应温度为500~520°C,剂油比从5增加到8时,催化汽油研究法辛烷值降低了1.1~1.7个单位。
Effects of operation conditions were studied on the compositions and research octane number (RON) of fluid catalytic cracking (FCC) gasoline with GOR-Q catalyst for reducing olefin and with normal MLC-500 catalyst. The results show that most of gasoline olefins are in low carbon number and the effect of GOR-Q catalyst on decreasing gasoline olefin is obvious. The influence of the operation conditions on olefin, aromatic and iso-paraffin content of FCC gasoline is apparent. The operation conditions less than 520°C in reaction temperature and no less than 7 in catalyst to oil ratio for GOR-Q catalyst are beneficial to the reduction of gasoline olefin content. The RON of FCC gasoline will decrease by 1.1 to 1.7 units under the reaction temperature from 500 to 520°C and the catalyst to oil ratio from 5 to 8.
参考文献:
正在载入数据...
