文献类型：期刊文献

中文题名：聚苯并噁嗪材料PB-m和PB-a的制备及其表面性能

英文题名：Preparation of PB-m and PB-a Polybenzoxazine Films and Their Surface Properties

作者：曲丽[1];周长路[1];辛忠[1]

机构：[1]华东理工大学化学工程联合国家重点实验室,上海200237

年份：2011

卷号：37

期号：6

起止页码：659

中文期刊名：华东理工大学学报（自然科学版）

外文期刊名：Journal of East China University of Science and Technology

收录：CSTPCD;;Scopus;北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：上海市科委纳米技术专项资助课题(0652nm001)

语种：中文

中文关键词：聚苯并噁嗪;制备;表面性能;热稳定性;表面自由能

外文关键词：polybenzoxazine; preparation; surface properties; thermal stability; surface free energy

摘要：合成了以双酚A为骨架,含甲基的B-m苯并噁嗪单体和含苯基的B-a苯并噁嗪单体,考察了温度、时间等因素对聚苯并噁嗪成膜后表面能的影响,并对聚苯并噁嗪材料的成膜性能、热稳定性能进行了研究。结果表明:苯并噁嗪单体B-m和B-a在210℃固化1 h后得到聚苯并噁嗪膜层的表面能最低,分别为16.0 mJ/m2和16.6 mJ/m2,显著低于单纯聚四氟乙烯膜层的表面能(22.0 mJ/m2),相应得到聚苯并噁嗪膜的表面粗糙度分别为0.4 nm和0.2 nm,PB-m和PB-a失重5%时的温度分别为279℃和335℃。PB-a聚合物具有更好的热稳定性。
Benzoxazine monomers with methyl group （B-m） and benzyl group （B-a） in bisphenol A backbone were synthesized. The effects of curing temperature and curing time on the surface free energy of the polybenzoxazines film were investigated. The film formation property and thermal stability of polybenzoxazines were also studied. The lowest surface free energies of the polybenzoxazines films （16.0 and 16.6 mJ/m2） are obtained by curing B-m and B-a at 210 ℃ for 1 h, which are even lower than that of Teflon （22.0 rnJ/mZ）. The root-mean-square roughness of PB-m and PB-a polybenzoxazine films were 0.4 nm and 0.2 nm, respectively. Temperatures at 5% weight loss for the PB-m and PB-a are 279℃and 335 ℃, respectively. The thermal stability of PB-a polybenzoxazine is better than that of PB-m.