文献类型：期刊文献

中文题名：拉锥光纤在传感中的弯曲损耗

英文题名：Bending Loss of Tapered Optical Fiber in Sensing

作者：郭嘉豪[1];武明明[1];叶安[1];李晓林[1];钮月萍[1];龚尚庆[1]

机构：[1]华东理工大学物理学院,上海200237

年份：2024

卷号：50

期号：4

起止页码：619

中文期刊名：华东理工大学学报（自然科学版）

外文期刊名：Journal of East China University of Science and Technology

收录：;Scopus;北大核心:【北大核心2023】；CSCD:【CSCD_E2023_2024】；

基金：国家自然科学基金(61835013,12034007,11974109);上海市自然科学基金(21XD1400700);中央高校基本科研业务费。

语种：中文

中文关键词：拉锥光纤;光学传感;弯曲损耗;受力形变

外文关键词：tapered optical fiber;optical sensing;bending loss;stress deformation

摘要：拉锥光纤在光学传感,尤其是压力传感器方面应用广泛,这是利用了光纤受到外力弯曲后的功率损失。采用有限元方法模拟了绝热直线型拉锥光纤各个位置,特别是锥形过渡区域的弯曲损耗。数值模拟结果表明,相较于其他区域,光纤的芯模截止区弯曲损耗更大,压力灵敏度更高,这是因为该位置的临界锥角取值最小,绝热条件在弯曲下更容易被破坏。该结果将为拉锥光纤传感器设计中传感点的选取提供有价值的参考。
Tapered optical fiber is widely used in optical sensing,especially pressure sensors,which takes advantage of the power loss of the fiber after being bent by external force.The bending loss of the adiabatic linearly tapered optical fiber at various positions,especially in the transition region,were simulated using finite element method.The beam envelope method of the wave optics module of the simulation software was used to study the bending loss,which ensured the accuracy of the calculation and reduced the calculation amount greatly.The numerical simulation results show that the bending loss in the core mode cutoff region of the fiber is larger and the stress sensitivity is greater than those in other regions.This is because that there is mode evolution process in this region,which the critical angle takes the smallest value and the adiabatic condition is most easily broken.Therefore,the pressure sensor can select this specific region as the sensing location to achieve higher sensitivity.In addition,the diameter of the fiber in the core mode cutoff region is tens of microns,which can provide better mechanical structure strength compared with the waist region,so as to achieve higher mechanical stability.Moreover,the fiber with higher bending sensitivity can be found by changing the profile of the transition region of the tapered optical fiber,that is,the size of the local tapered angle,for the experimental fabrication of the sensor.These preliminary theoretical simulation results can provide a valuable reference for the design and application of tapered optical fiber sensors.