文献类型：期刊文献

中文题名：镍基复合刷镀层研究

英文题名：Study on Electro-brush Nickel Matrix Composite Coats

作者：艾薇[1];高志[2];潘红良[2];张菁菁[2];艾红[3]

机构：[1]长江大学机械学院,湖北荆州434023;[2]华东理工大学机械学院,上海200237;[3]湖北省孝感市供电局,湖北孝感432100

年份：2005

期号：5

起止页码：39

中文期刊名：现代机械

外文期刊名：Modern Machinery

语种：中文

中文关键词：工艺;电刷镀;Ni-石墨;复合镀层;复合刷镀层;电刷镀技术;镍基;石墨微粒;复合电刷镀;正交实验法;工艺方案;镀液;快速镍

外文关键词：processing; electro-brush ; Ni-graphite ; composite coats

摘要：在快速镍电刷镀技术的基础上,研究了在镀液中加入石墨微粒,通过改变镀液浓度、电压、pH值以及镀速等条件,达到改变镀层的耐磨性。通过正交实验法优化确定了Ni-石墨复合电刷镀镀液较佳的浓度配制。并分析了电刷镀镀液各成分在刷镀中的作用以及它们对镀速的影响。从而提出了一套较完整的Ni-石墨复合电剧镀工艺方案。
Base on the technology of fast nickel brushing plating, the influence of plate liquid consistency, voltage, the pH value and plating speed on wear resistance were studied by adding Graphite particle into the fast nickel brushing plating liquid. The prescrip- tion and the optimum processing parameters in making composite plating of Ni-Graphite were obtained by orthogonal experiments. The effect of electro-brush plate liquid composition on plating speed and film composition was analysed in detail. A more complete Ni-Graphite compound electro-brush plate technology plan was obtained.