文献类型：期刊文献

中文题名：Cu-PTFE自润滑镀层的制备工艺及沉积过程的控制步骤研究

英文题名：Preparation of a new Cu-PTFE self-lubricating coatings and the determining step of electrodepositing process

作者：钱瑜明[1];黄志荣[1]

机构：[1]华东理工大学机械与动力工程学院,上海200237

年份：2010

卷号：33

期号：2

起止页码：51

中文期刊名：兵器材料科学与工程

外文期刊名：Ordnance Material Science and Engineering

收录：CSTPCD;;CSCD:【CSCD2011_2012】；

语种：中文

中文关键词：Cu—PTFE;自润滑镀层;摩擦因数;显微硬度;控制步骤

外文关键词：Cu-PTFE self-lubricative composite coatings coefficient of friction microhardness determining step

摘要：采用电沉积的方法制备Cu-PTFE自润滑复合电镀层,研究最佳制备工艺参数及其沉积过程的控制步骤。最佳工艺条件为:CuSO4 85 g/L,H2SO4 55 g/L,PTFE 40 g/L,电流密度4.0 A/dm2,反应温度25℃,反应时间60 min。该复合电镀层具有良好的硬度和润滑性能,并且研究沉积过程中颗粒浓度对控制步骤的影响。
The self-lubricative composite coatings were prepared by electrodeposition.The process parameters and the determining step of electrodepositing process were studied.The optimal process parameters were： CuSO4 85 g/L,H2SO4 55g/L,PTFE 40 g/L,current density 4.0 A/dm2,reaction temperature 25 ℃,reaction time 60 min.The composite films show excellent tribological properties,acting as self-lubricating coatings with low friction coefficients and high hardness.And the effect of particles concentration on the determining step was also discussed.