文献类型：期刊文献

英文题名：Enhanced adsorption of fluoride by cerium immobilized cross-linked chitosan composite

作者：Zhu, Tianyi[1];Zhu, Tianhong[3];Gao, Jie[1];Zhang, Lingfan[1,2];Zhang, Wenqing[1]

机构：[1]East China Univ Sci & Technol, Sch Chem & Mol Engn, Shanghai 200237, Peoples R China;[2]East China Univ Sci & Technol, Res Ctr Anal & Test, Shanghai 200237, Peoples R China;[3]Lanzhou Inst Food & Drug Control, Lanzhou 730030, Gansu, Peoples R China

年份：2017

卷号：194

起止页码：80

外文期刊名：JOURNAL OF FLUORINE CHEMISTRY

收录：;WOS:【SCI-EXPANDED(收录号:WOS:000393938200010)】；

基金：We are grateful for the financial support by National Natural Science Foundation of China (Grant No. 21407050) and the Fundamental Research Funds for the Central Universities (Grant No. 22A201514019).

语种：英文

外文关键词：Bioadsorbent; Chitosan; Cerium; Fluoride; Adsorption

摘要：In this present study, a bio-adsorbent based on cerium immobilized cross-linked chitosan (CTS-Ce) composite was prepared and employed for the removal of fluoride from water. This bio-absorbent was characterized by fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), elemental mapping images (EMI) and X-ray photoelectron spectroscopy (XPS) analyses. Adsorption properties for fluoride removal were systematically investigated, including pH (2-11), initial fluoride concentrations (5.0-100 mg/L), contact time, temperature (10-40 degrees C) and co-existing ions. Besides, kinetics, isotherms, thermodynamics and regeneration were also studied to evaluate the fluoride adsorption performance on this adsorbent. Results showed the experimental data followed Langmuir isotherm and pseudo-second order kinetic model. The adsorption process was controlled by intra-particle diffusion and the maximum adsorption capacity calculated by Langmuir isotherm was 153 mg/g at 20 degrees C (close to experimental q(e) value 149 mg/ g), which was higher than the raw chitosan (13.2 mg/g) and most of the reported adsorbents. The adsorption mechanisms for fluoride removal were (i) the electrostatic attraction among-NH3+ and Ce3+/4+ with F- ions, (ii) the ligand exchange between NO3- and F- and (iii) the formation of CTS-Ce-F complexation. This novel composite can be easily regenerated with NaOH solution while maintaining 78% removal efficiency after 3 cycles. It was believed that this composite had great potential to remove fluoride from contaminated water. (C) 2017 Published by Elsevier B.V.