文献类型：期刊文献

中文题名：中孔炭纳米片的制备及硫化氢脱除性能研究

英文题名：Synthesis of mesoporous carbon nanosheets for hydrogen sulfide removal

作者：刘光岚[1];贾献峰[1,3];马成[1];刘小军[1];王际童[1,2];乔文明[1];凌立成[1,2]

机构：[1]华东理工大学化学工程联合国家重点实验室,上海200237;[2]华东理工大学特种功能高分子材料及相关技术教育部重点实验室(B),上海200237;[3]唐山师范学院化学系,河北唐山063000

年份：2021

卷号：40

期号：2

起止页码：46

中文期刊名：炭素技术

外文期刊名：Carbon Techniques

收录：CSTPCD;;北大核心:【北大核心2020】；

基金：国家自然科学基金-山西煤基低碳联合基金项目(U1710252);国家自然科学基金面上项目(21978097)。

语种：中文

中文关键词：中孔炭纳米片;碱负载;催化氧化

外文关键词：Mesoporous carbon nanosheets;alkali loading;catalytic oxidation

摘要：以酚醛树脂为碳源,石墨烯为结构导向剂,硅溶胶为模板,1,6-己二胺(DAH)为链接剂,通过溶胶-凝胶反应制备出一种比表面积达991.5 m2·g-1、孔容达3.46 cm3·g-1的中孔炭纳米片(MCNs)。通过SEM、TEM和N2吸脱附表征MCNs的结构,负载活性物质后用于室温下H2S的催化脱除。研究结果表明,MCNs独特的片状结构不仅能够促进催化过程中H2S的扩散,而且片上的中孔结构有利于活性组分的负载以及脱硫产物的存储。当NaOH的负载质量分数达到20%时,其穿透硫容达到2.93 g·g-1(H2S/催化剂),并且催化剂对H2S的转化率接近100%,产物分析表明,单质硫和硫酸盐为主要的脱硫产物,其堵塞孔道结构是造成材料失活的主要原因。
Mesoporous carbon nanosheets(MCNs)with high specific surface area up to 991.5 m2·g-1 and pore volume up to 3.46cm3·g-1 are prepared through sol-gel process using phenolic resin as carbon source,graphene as structural guide agent,silica sol as template and 1,6-hexylenediamine(DAH)as link agent.Their microstructure and pore structure are investigated by SEM,TEM and N2 adsorption.MCNs prepared are loaded with active components and then used for catalytic removal of H2S at room temperature.It is found that the unique sheet structure of MCNs can not only promote the diffusion of H2S gas during the catalytic process,but also facilitate the uniform distribution of active components and the storage of desulfurized products.When the NaOH loading amount reaches 20%,its breakthrough sulfur capacity can achieve 2.93 g·g-1(H2S/catalyst),and the conversion rate of catalyst to H2S is close to100%.The main desulfurization products are elemental sulfur and sulfate which block the pores causing the catalyst deactivation.