详细信息
以碳酸钙微球为模板的生物相容微胶囊的制备
Preparation of Biocompatible Microcapsules Templated on Calcium Carbonate Microspheres
文献类型:期刊文献
中文题名:以碳酸钙微球为模板的生物相容微胶囊的制备
英文题名:Preparation of Biocompatible Microcapsules Templated on Calcium Carbonate Microspheres
作者:金谊[1];朱以华[2];刘望才[1];王家荣[1];房江华[1]
机构:[1]宁波工程学院化工学院聚合工程与技术宁波市重点实验室,浙江宁波315016;[2]华东理工大学材料科学与工程学院超细材料制备与应用教育部重点实验室,上海200237
年份:2009
卷号:9
期号:4
起止页码:776
中文期刊名:过程工程学报
外文期刊名:The Chinese Journal of Process Engineering
收录:CSTPCD;;Scopus;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;
基金:浙江省教育厅基金资助项目(编号:20070761);宁波市自然科学基金资助项目(编号:2008A610040);宁波市石油化工人才培养基地资助项目(编号:Jd070114)
语种:中文
中文关键词:碳酸钙;微胶囊;模板;层层自组装
外文关键词:CaCO3; microcapsules; template; layer-by-layer self-assembly
摘要:以CaCl2和Na2CO3为原料,通过结晶生长制备了掺杂聚苯乙烯磺酸钠(PSS,直径为4~5μm)的CaCO3颗粒,探讨了PSS功能团与钙离子的摩尔比([PSS]/[Ca2+])对其形貌和晶型的影响,并以合成的CaCO3微球为模板,采用层层自组装技术将具有相反电荷的鱼精蛋白和硫酸葡聚糖交替组装到微球表面,除去模板后得到了具有生物相容性的空腔胶囊,并以绿原酸为缓释物对微胶囊的缓释性能进行了研究.结果表明,微胶囊的包封率和载药量分别为83.55%和37.41μg/mg,对绿原酸具有明显的缓释效果.
Poly(sodium 4-styrenesulfonate)(PSS) was used to synthesize calcium carbonate(CaCO3) microspheres with different morphologies.The influences of different functional group unit molar ratios of [PSS]/[Ca2+] on the morphology and crystal phases of CaCO3 microspheres were studied by high scan electrode microscope and X-ray diffraction.These synthesized microspheres were used as the template of microcapsules.Protamine sulfate(PRM) and dextran(DXS) were self-assembled on the surface of obtained microshperes by layer-by-layer self-assembly technique.After the CaCO3 was dissolved,the microcapsules were obtained.The controlled release behavior of hollow capsules was examined in the sample of chlorogenic acid.The result shows that the encapsulated rate and loaded drug amount were 83.55% and 37.41 μg/mg,respectively.The(DXS/PRM)6 capsules demonstrated obvious controlled release effect.
参考文献:
正在载入数据...
