文献类型：期刊文献

中文题名：乙烷氧化脱氢制乙烯催化剂颗粒外形设计

英文题名：Catalyst particle shape design for ethane oxidative dehydrogenation to ethylene

作者：贺逸健[1];刘祥坤[1];施尧[1];段学志[1]

机构：[1]华东理工大学化学工程联合国家重点实验室,上海200237

年份：2025

卷号：44

期号：6

起止页码：3497

中文期刊名：化工进展

外文期刊名：Chemical Industry and Engineering Progress

收录：;EI(收录号：20253018838728);北大核心:【北大核心2023】；

基金：国家重点研发计划(2022YFA1503803)。

语种：中文

中文关键词：乙烷氧化脱氢;固定床;传递过程;数值模拟;选择性;颗粒外形设计

外文关键词：oxidative dehydrogenation of ethane;fixed-bed;transport process;numerical simulation;selectivity;particle shape design

摘要：“双碳”目标下,乙烷催化脱氢制乙烯作为一条低成本、环境友好型的非石油化工路径,具有广阔的发展前景。本文通过建立床层-颗粒耦合模型和颗粒分辨的反应器模型分别进行反应操作条件的优化和催化剂颗粒外形的设计。结果表明,提高入口温度、减小空速和增加入口压力都有利于提高乙烷转化率,但同时会导致床层温升的增加而降低乙烯的选择性,最优的操作条件为633K的入口温度、2000h^(-1)的空速及1.25bar(1bar=10^(5)Pa)的入口压力。基于优化后的反应操作条件对四种不同的堆积结构(球形、圆柱、拉西环和三叶草)进行比较,发现球形和拉西环堆积结构分别有着最高和最低的反应器温升(31K和12K),最高和最低的乙烯收率(48.6%和43.6%),其中三叶草堆积结构因其能在维持较高乙烯收率的同时有效控制反应器温升,最适合乙烷氧化脱氢反应。
In the pursuit of dual carbon targets,catalytic dehydrogenation of ethane to ethylene emerges as a cost-efficient and eco-friendly non-petrochemical industry path,holding immense promise for future development.In this work,reactor-pellet coupled model and particle-resolved model had been established to optimize operating conditions and catalyst particle shapes,respectively.The results indicated that increasing inlet temperature,reducing space velocity,and elevating inlet pressure all contributed to high ethane conversion,but concurrently led to increased reactor temperature rise,which in turn inhibited the selectivity of ethylene.Optimal operating conditions had been determined as follows:inlet temperature of 633K,gas hourly space velocity of 2000h^(-1) and inlet pressure of 1.25bar(1bar=10^(5)Pa).Among the four types of packings sphere,cylinder,Raschig ring and trilobe,the sphere and Raschig ring packing structures exhibited respectively the highest and lowest reactor temperature rises(31K and 12K),as well as the corresponding highest and lowest ethylene yields(48.6%and 43.6%).The trilobe packing which maintained a tradeoff between ethylene yield and temperature rise,was the optimal particle shape for oxidative dehydrogenation of ethane.