文献类型：期刊文献

英文题名：A method to determine minimum design metal temperature of pressure vessels made from ferritic steel by Master Curve approach

作者：Zhou, Zhongqiang[1];Hui, H.[1];Zhang, Yalin[1];Cong, Xiangchun[1];Bai, Hui[1]

机构：[1]East China Univ Sci & Technol, Sch Mech & Power Engn, Shanghai 200237, Peoples R China

年份：2020

卷号：224

外文期刊名：ENGINEERING FRACTURE MECHANICS

收录：;EI(收录号：20194307565831);WOS:【SCI-EXPANDED(收录号:WOS:000504452100001)】；

语种：英文

外文关键词：Minimum design metal temperature; Impact exemption curve; Low temperature fracture toughness; Reference temperature T-0MC

摘要：The four impact exemption curves in ASME are convenient to estimate the minimum design metal temperature (MDMT) of ferritic steel. However they can't distinguish low temperature fracture toughness of ferritic steel well. Materials with similar fracture toughness, divided into different impact exemption curves will have different MDMT and conservative degree. And the MDMT of ferritic steel are estimated by the steel grade. There are differences in toughness for steel with same steel grade from different factories and different heats and batches of the same factory. In this paper, the seven MDMT curves, identified with labels I, II, III, IV, V, VI and VII are proposed based on assumed yield strength and seven reference temperatures, (T-0MC = 20 degrees C, 0 degrees C, -20 degrees C, -40 degrees C, -60 degrees C, -80 degrees C and -100 degrees C) which can cover the temperature range for commonly used pressure vessels made from ferritic steel. The MDMT for a ferritic steel can be determined once the reference temperature and yield strength are measured. SA508-3 and Q345R, as a representative of ferritic steel are used to illustrate the applicability of the MDMT curves.