文献类型：期刊文献

中文题名：多壁碳纳米管的球磨处理对其吸附储氢性能的影响

英文题名：Ball Milling Process and Its Effect on Hydrogen Adsorption Storage of MWNTS

作者：姚运金[1];张素平[1];颜涌捷[1]

机构：[1]华东理工大学资源与环境工程学院,上海200237

年份：2006

卷号：6

期号：5

起止页码：837

中文期刊名：过程工程学报

外文期刊名：The Chinese Journal of Process Engineering

收录：CSTPCD;;EI(收录号：20065110317690);Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

基金：上海市科委纳米专项基金资助项目(编号:0352nm087)

语种：中文

中文关键词：多壁碳纳米管;吸附储氢;化学气相沉积法;球磨

外文关键词：MWNTs; hydrogen adsorption storage; chemical vapor deposition; ball milling

摘要：研究了球磨改性对多壁碳纳米管储氢性能的影响,球磨处理前后的碳纳米管微观结构采用TEM和XRD进行表征.结果发现,球磨处理能使碳纳米管长度变短,管端口打开,缺陷增多,表面积增大,球磨处理12h的碳纳米管的吸附量从未球磨的1.60%(ω)提高到2.55%(ω),表明球磨改性能明显提高碳纳米管的吸附量.
The effect of mechanical ball milling with different time on the hydrogen adsorption behavior of the multi-wall carbon nanotubes （MWNTs） was studied. The microstructure characteristics of MWNTs before and after ball milling were examined by transmission electron microscope （TEM） and X-ray diffraction （XRD）. The results showed that ball milling could break MWNTs, shorten their length, open the tips of the tubes, and increased their surface defects and specific surface area at the same time. After ball milling for 12 h, the hydrogen storage capacity of MWNTs increased from 1.60% to 2.55%. The enhancement of hydrogen adsorption might result from the increase of defects and surface area of the MWNTs caused by ball milling.