文献类型：期刊文献

中文题名：β-环糊精对增塑PVC热稳定性及增塑剂迁移性的影响

英文题名：Effect of β-Cyclodextrin on Thermal Stability and Plasticizer Migration of Plasticized PVC

作者：王芹[1,2];吴唯[1];唐艳芳[2];卞俭俭[2];朱送伟[1]

机构：[1]华东理工大学材料科学与工程学院,上海200237;[2]上海新上化高分子材料有限公司,上海201314

年份：2016

卷号：28

期号：1

起止页码：42

中文期刊名：现代塑料加工应用

外文期刊名：Modern Plastics Processing and Applications

收录：CSTPCD;;北大核心:【北大核心2014】；

语种：中文

中文关键词：聚氯乙烯;环氧脂肪酸甲酯;β-环糊精;迁移性;热失重分析

外文关键词：poly（vinyl chloride）; epoxy fatty acid methyl ester; fl-cyclodextrin; mi-gration; thermogravimetic analysis

摘要：通过加入不同量的β-环糊精,采用熔融共混法制备了环氧脂肪酸甲酯增塑聚氯乙烯(PVC)。热失重分析结果表明,加入β-环糊精或辐照处理过程均会导致增塑PVC的起始降解温度(tonset)降低。当辐照剂量为25kGy时,tonset降低,当辐照剂量从25kGy增加至50kGy及100kGy时,tonset继续升高。当迁移介质为PVC树脂时,加入10.0份β-环糊精能够明显抑制高辐照剂量下环氧脂肪酸甲酯的迁移;迁移介质为空气时,加入1.0份β-环糊精能够有效抑制辐照后增塑PVC环氧脂肪酸甲酯的迁移。
Epoxy fatty acid methyl ester plasticized PVC loaded with different contents of β-eyclodextrin were prepared by melt blending method. TGA results show that either the addition of β-cyclodextrin or the irradiation process results in the decrease of the onset temperature of degradation （tonset） of plasticized PVC. The tonset decreases when irradiation dose at 25 kGy, and the tonset increases with irradiation dose increasing from 25 to 100 kGy. When the medium is PVC resin, the addition of 10.0 phr β-cyclodextrin inhibits the migration of epoxy fatty acid methyl ester at high irradiation dose. When the medium is air, the addition of 1.0 phr β-cyclodextrin can effectively restrain the migration of epoxy fatty acid methyl ester after irradiation in the plasticized PVC.