文献类型：期刊文献

英文题名：The effect of tool geometry on regenerative instability in ultrasonic vibration cutting

作者：Xiao, M.[1]; Wang, Q.M.[1]; Sato, K.[2]; Karube, S.[2]; Soutome, T.[2]; Xu, H.[1]

机构：[1]E China Univ Sci & Technol, Sch Mech & Power Engn, Shanghai 200237, Peoples R China;[2]Utsunomiya Univ, Dept Mech Syst Engn, Utsunomiya, Tochigi 3218585, Japan

年份：2006

卷号：46

期号：5

起止页码：492

外文期刊名：INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

收录：;EI(收录号：2006039647881);WOS:【SCI-EXPANDED(收录号:WOS:000236504400004)】；

语种：英文

外文关键词：tool geometry; stability diagram; cutting model; regenerative chatter; computer simulation; ultrasonic vibration cutting; hard cutting

摘要：Ultrasonic vibration cutting as a cutting process has been widely used in the precision machining of difficult-to-cut materials due to an enhanced cutting stability and increased productivity. The authors' previous researches have shown that chatter vibration prediction is made possible by the suggested cutting model. This paper is an attempt to determine cutting parameters based on regenerative chatter prediction in order to facilitate the machining objectives of high accuracy, high efficiency and low cost in ultrasonic vibration cutting. The machinability of SCM440 steel, called typical hardened steel, is investigated theoretically and experimentally. The cutting model is developed by introducing an experimental cutting database of SCM440 steel. The simulation and experimental results show that the workpiece material parameter has a direct influence on the occurrence of regenerative chatter. In order to achieve the chatter-suppressing dynamics in hard ultrasonic vibration cutting, a stability diagram is predicted based on the simulated work displacement for tool geometry changing. The stability diagram indicates that the regions of the chatter-suppressing dynamics expand with increasing tool rake angle and decreasing tool clearance angle. It is also found from the predictive results that regenerative chatter can be suppressed by a change of tool geometry. The determined tool geometry with the aid of the computer simulation is demonstrated through actual data of ultrasonic vibration cutting. By the use of the designed tool geometry, a good experimental result is achieved. (c) 2005 Elsevier Ltd. All rights reserved.