详细信息

热处理条件对R-PET/LLDPE-g-MA共混物中PET玻璃化转变行为的影响  ( SCI-EXPANDED收录)  

Effects of Annealing Condition on the Glass Transition Behavior of PET in R-PET/LLDPE-g-MA Blends

文献类型:期刊文献

中文题名:热处理条件对R-PET/LLDPE-g-MA共混物中PET玻璃化转变行为的影响

英文题名:Effects of Annealing Condition on the Glass Transition Behavior of PET in R-PET/LLDPE-g-MA Blends

作者:张玥[1];张洪生[1];郭卫红[1];吴驰飞[1]

机构:[1]华东理工大学材料学院高分子合金研究室,上海200237

年份:2009

卷号:30

期号:5

起止页码:1024

中文期刊名:高等学校化学学报

外文期刊名:Chemical Journal of Chinese Universities

收录:CSTPCD;;Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000266417200036)】;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;

基金:国家自然科学基金(批准号:20574019)资助

语种:中文

中文关键词:回收聚对苯二甲酸乙二酯(R—PET);玻璃化转变;热处理温度;热处理时间

外文关键词:Recycle-polycethylene terephatalate (R-PET) ; Glass transition ; Annealing temperature ; Annealing time

摘要:对回收聚对苯二甲酸乙二酯(R-PET)/LLDPE-g-MA马来酸酐改性的线性低密度聚乙烯共混物进行不同条件的热处理,采用差示扫描量热仪(DSC)研究共混物基体PET的玻璃化转变行为.结果表明,当热处理温度低于PET的玻璃化转变温度(Tg)时,PET的玻璃化转变区域出现热焓松弛现象.随着热处理温度的增加,PET的Tg逐渐升高;在50~70℃下热处理48 h后,PET的Tg逐渐稳定.当热处理温度高于PET的Tg而低于100℃时,PET的玻璃化转变区域出现2个热流转变,FTIR分析表明,PET分子构象开始发生变化.当热处理温度为100℃时,DSC曲线上PET的玻璃化转变消失,PET的结晶度明显增加,说明PET开始冷结晶的温度在90~100℃之间.
Effects of annealing temperature and annealing time on the glass transition of PET in the Recyclepolyeethylene terephatalate (R-PET)/LLDPE-g-MA blends were investigated by DSC. The sub-Tg annealing leads to the enthalpy relaxation in the glass transition region of PET. The Tg of PET shifts to higher temperature with the increase of annealing temperature. The Tg of PET tends to be stable in the blends annealed at 50-70 ℃ for more than 48 h. After above-Ts annealing below 100 ℃, two heat flow transitions of PET appear around the Ts of PET. FTIR results show that molecular conformation of PET begin to change. However, the glass transition of PET disappears in the blend annealed at 100 ℃, and WAXD results show that the crystallinity of PET increases obviously, indicating that the Tc of PET is between 90-100 ℃.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心