文献类型：期刊文献

中文题名：A Poly-(3-Hexylthiophene) (P3HT)/[6,6]-Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Bilayer Organic Solar Cell Fabricated by Airbrush Spray Deposition

英文题名：A Poly-(3-Hexylthiophene) (P3HT)/[6,6]-Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Bilayer Organic Solar Cell Fabricated by Airbrush Spray Deposition

作者：Chen Zheng[1];Deng Zhen-Bo[1];Zhou Mao-Yang[1];Lu Zhao-Yue[2];Du Hai-Liang[1];Zou Ye[1];Yin Yue-Hong[1];Lun Jian-Chao[1]

机构：[1]Beijing Jiaotong Univ, Inst Optoelect Technol, Minist Educ, Key Lab Luminescence & Opt Informat, Beijing 100044, Peoples R China;[2]E China Univ Sci & Technol, Sch Sci, Dept Phys, Shanghai 200237, Peoples R China

年份：2012

卷号：29

期号：7

中文期刊名：Chinese Physics Letters

外文期刊名：CHINESE PHYSICS LETTERS

收录：CSTPCD;;EI(收录号：20220711652819);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000306551200075)】；CSCD:【CSCD2011_2012】；

基金：Supported by Beijing Municipal Science & Technology Commission (No Z090803044009001), and the National Natural Science Foundation of China under Grant Nos 60977027 and 60825407.

语种：英文

中文关键词：PCBM;Solar;brush;

外文关键词：Deposits - Open circuit voltage - Organic solar cells - Fabrication - Film preparation - Heterojunctions

摘要：Airbrush spray deposition is applied to fabricate a bilayer heterojunction solar cell based on P3HT/PCBM.This solar cell device shows an open-circuit voltage of 0.36V,a short circuit current density of 6.76mA/cm2,a conversion efficiency of 0.74%,and a fill factor of 30.4%.The results demonstrate that airbrush spray deposition is an effective method to fabricate multilayer or other complex polymer-based organic solar cells.Although spin-coated bulk heterojunction devices have better performance than the airbrushed ones,the airbrush is indeed feasible as a low-cost yet simple process.It is noteworthy that such preliminary results of the airbrush spray solar cell is unoptimized and thus its performance can be further improved with the development of this technology.Furthermore,this method itself has huge potential as it can be used for other polymer-based organic thin film devices.
Airbrush spray deposition is applied to fabricate a bilayer heterojunction solar cell based on P3HT/PCBM. This solar cell device shows an open-circuit voltage of 0.36 V, a short circuit current density of 6.76 mA/cm(2), a conversion efficiency of 0.74%, and a fill factor of 30.4%. The results demonstrate that airbrush spray deposition is an effective method to fabricate multilayer or other complex polymer-based organic solar cells. Although spin-coated bulk heterojunction devices have better performance than the airbrushed ones, the airbrush is indeed feasible as a low-cost yet simple process. It is noteworthy that such preliminary results of the airbrush spray solar cell is unoptimized and thus its performance can be further improved with the development of this technology. Furthermore, this method itself has huge potential as it can be used for other polymer-based organic thin film devices.