文献类型：期刊文献

中文题名：超临界CO2辅助聚合物加工

英文题名：Supercritical CO_2 assisted polymer processing

作者：赵玲[1];刘涛[1]

机构：[1]华东理工大学,化学工程联合国家重点实验室,上海200237

年份：2013

卷号：64

期号：2

起止页码：436

中文期刊名：化工学报

外文期刊名：CIESC Journal

收录：CSTPCD;;EI(收录号：20131116114715);Scopus;北大核心:【北大核心2011】；CSCD:【CSCD2013_2014】；

基金：国家自然科学基金项目(20976045,20976046);国家高技术研究发展计划项目(2012AA040211);长三角科技联合攻关项目(12195810900)~~

语种：中文

中文关键词：超临界CO2;聚合物加工;结晶;发泡;溶解;扩散

外文关键词：supercritical CO2; polymer processing; crystallization; foam; solution; diffusion

摘要：近年来,以超临界CO2替代聚合物加工过程中大量使用的有机溶剂实现超临界CO2辅助聚合物加工过程已引起人们越来越多的关注。CO2在聚合物中的溶解扩散可导致其结构和形态的变化,能够溶胀增塑聚合物并且将溶解于其中的小分子物质携带输运到聚合物基体中,进而影响聚合物的结晶及晶型转变行为,聚合物/CO2体系界面张力以及聚合物/CO2体系流变行为等基本物性的变化。利用聚合物基本物性的变化可实现CO2辅助聚合物接枝反应,CO2辅助聚合物渗透小分子物质以及CO2辅助聚合物发泡等超临界CO2辅助聚合物加工过程的应用。结合本研究室的实例,探讨了CO2作用下等规聚丙烯和间规聚丙烯的结晶行为以及一种多晶型聚合物——等规聚丁烯-1的晶型转变行为;探讨了利用CO2对等规聚丙烯、聚乳酸和聚酯三种典型的低熔体强度结晶聚合物具有的不同诱导结晶作用,调控聚合物的结晶行为,使其具备发泡所需的熔体强度,制备了具有不同结构特征的发泡聚合物材料。
The use of CO2 for substituting volatile organic compounds in polymer processing, i.e., supercritical CO2-assisted polymer processing, has attracted increasing attention in recent years. Dissolution of CO2 in polymer could swell, plasticize and deliver small molecules into the polymer matrixes. Consequently, the structure and morphology of the polymer would change, as well as the fundamental properties, including polymer crystallization, interracial tension between polymer and gas, and rheology of CO2/polymers melt. CO2-induced changes in these properties could be used to realize the supercritical CO2-assisted polymer processing, e.g., CO2-assisted polymer grafting, CO2-assisted penetrating of small molecules into polymer and CO2-assisted polymer foaming. Several cases from the authors＇ laboratory are presented for elucidating how to use the changes to manipulate the CO2-assisted polymer processing. The cases include CO2-induced crystallization of isotactic polypropylene and syndiotactic polypropylene, CO2-induced crystal phase transition of isotactic poly-l-butene, and how to use CO2-induced crystallization to manipulate melt strength of three linear polymers, i. e. , isotactic polypropylene,poly（lactic acid） and poly （ethylene terephthalate）, to prepare the polymer foams with different structures.