详细信息

Solid-phase grafting of glycidyl methacrylate onto polypropylene  ( SCI-EXPANDED收录)  

文献类型:期刊文献

英文题名:Solid-phase grafting of glycidyl methacrylate onto polypropylene

作者:Pan, YK; Ruan, JM; Zhou, DF

年份:1997

卷号:65

期号:10

起止页码:1905

外文期刊名:JOURNAL OF APPLIED POLYMER SCIENCE

收录:;WOS:【SCI-EXPANDED(收录号:WOS:A1997XP29700007)】;

语种:英文

摘要:Free-radical grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) powder was studied in a batch mixer. The reaction temperature was below the melting point of PP so that PP was modified in the solid phase. The graft yield of GMA obtained under various experimental conditions allowed for a good appreciation of the effects of chemical parameters (the concentration of monomer, initiator, and interfacial agent) and those of processing parameters (reaction time and temperature). Toluene was used as an interfacial agent to etch the surface of PP powder to provide more sites for reaction. Quantitative determination of the graft level was performed by wet chemical methods. The results showed that the solid-phase grafting could take place over a temperature range of 100-140 degrees C in the initiation of benzoyl peroxide (BPO). The ultimate GMA grafting level achieved was higher than that obtained in the melt state with dicumyl peroxide (DCPO) as a radical initiator. The grafting of GMA affected the crystalline morphology of PP and speeded up the crystallization process. The energy of activation and initial decomposition temperature of grafted samples were higher than those of ungrafted PP. (C) 1997 John Wiley & Sons, Inc.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心