文献类型：期刊文献

中文题名：流体在多孔管分支系统中的流动机理研究

英文题名：Flow Performance in Porous Pipe Manifolds

作者：王峻晔[1];章明川[1];吴东棣[2]

机构：[1]上海交通大学能源工程系;[2]华东理工大学机械工程系

年份：1999

卷号：14

期号：1

起止页码：34

中文期刊名：水动力学研究与进展（A辑）

外文期刊名：Chinese Journal of Hydrodynamics

收录：CSTPCD;;Scopus;北大核心:【北大核心1996】；CSCD:【CSCD2011_2012】；

语种：中文

中文关键词：多孔管;气体分布器;流体均布;流动机理;管系

外文关键词：porous pipe, radial flow reactor, gas distributor, uniform distribution of fluid.

摘要：通过摩擦系数λ和动量交换系数ｋ两种变量的分析，确定了多孔管摩擦系数λ和动量交换系数ｋ的分析表达式，在此基础上，求出了变系数变质量动量方程的分析解。常系数方程的解成为变系数方程解在动量修正项为０、摩阻修正项为１时的特殊形式。另外，变系数变质量动量方程的解，仅是多孔管的结构尺寸参数Ｅ和流动参数Ｒｅ的函数。这不仅在新分布器上的设计上，可以优化结构，确定分布器的工况稳定性和安全性，而且在在役分布器的校核上，可方便地模拟操作工况。
Through the analysis of friction and pressure recovery in porous pipe manifolds coefficients, the pressure recovery coefficient is represented as a function of flow velocity. An analytical solution of momentum equation with varying mass at varying coefficients is obtained. The solution for the case of constant coefficients is a special case of varying coefficients when momentum correction is zero and friction correction is one. In the solution of varying coefficients the static pressure is dependent on structure scale (the ratio of length to diameter) and flow parameter Re 0 . In the design of a new distributor its structure can be optimized. In the distributor in service the operational process can be simulated, and the optimum operational condition can be obtained. When the velocity distribution is linear, the solution for the case of varying coefficients agrees with experimental results.