文献类型：期刊文献

中文题名：甲醇重整微槽道反应器加工工艺的研究

英文题名：Study on the manufacturing process of micro-channel reactor for methanol reforming

作者：于新海[1];涂善东[1];王正东[1];马玉录[1];戚蕴石[1]

机构：[1]华东理工大学机械与动力工程学院,上海200237

年份：2006

卷号：36

期号：4

起止页码：305

中文期刊名：电池

外文期刊名：Battery Bimonthly

收录：CSTPCD;;Scopus;北大核心:【北大核心2004】；CSCD:【CSCD_E2011_2012】；

基金：国家自然科学基金项目资助(50225517;50475068);教育部博士点基金项目资助(20040251003)

语种：中文

中文关键词：微槽道;反应器;甲醇重整;燃料电池

外文关键词：micro-channel; reactor; methanol reforming; fuel cell

摘要：研制了一种甲醇重整微槽道反应器加工工艺。通过电火花加工技术,在合金片上加工出平行的微槽道,然后通过扩散焊将多层合金片焊接在一起,最后将催化剂涂层负载到微槽道反应器的内壁上。该微槽道反应器的氢气产率(0.37mol/h)可满足11 W燃料电池的需要。
A manufacturing process of micro-channel reactor for methanol reforming was prepared. Parallel micro-channels were patterned on alloy sheets by electric spark processing technology. Then, dozens of the multilayer alloy sheets were manufactured into a single structure by diffusion welding. At last, the catalytic coating was coated on the inner wall of the micro-channel reactor. The developed micro-channel reactor could generate enough hydrogen （0.37 mol/h） for power output of 11 W type fuel cell.