详细信息

氯化法制备钛白氧化反应器内射流混合特性研究    

Study on Jet Mixing Characters in the Oxidation Reactor for Titanium Dioxide Powder Production by Chloride Process

文献类型:期刊文献

中文题名:氯化法制备钛白氧化反应器内射流混合特性研究

英文题名:Study on Jet Mixing Characters in the Oxidation Reactor for Titanium Dioxide Powder Production by Chloride Process

作者:吕志敏[1];李春忠[1];丛德滋[1];张曙明[2];刘洪来[3];胡英[3]

机构:[1]华东理工大学技术化学物理研究所,上海200237;[2]东华工程公司;[3]华东理工大学化学与制药学院

年份:2001

卷号:29

期号:3

起止页码:25

中文期刊名:化学工程

外文期刊名:Chemical Engineering(China)

收录:CSTPCD;;Scopus;北大核心:【北大核心2000】;CSCD:【CSCD2011_2012】;

基金:国家 95重点科技攻关项目!( 96-5 5 4-0 2 );国家自然科学基金资助重点项目!( 2 963 60 10 )

语种:中文

中文关键词:钛白;氧化反应器;射流混合;特性;氯化法;颜料

外文关键词:TiO 2 pigment,oxidation reactor,jet mixing,chloride process

摘要:氧化反应器是制备氯化法钛白粉的核心设备 ,反应器内的混合特征决定了产品性能。文中采用示踪法研究了四氯化钛氧化反应器内径向射流混合特征 ,探讨了射流环开孔结构和动量比等因素对射流混合效果的影响。结果表明 ,射流环开孔结构对混合效果有重要影响 ,复合开孔结构的混合效果比均匀开孔结构的好 ;增大动量比有利于提高射流混合效率 ,对于开孔尺寸小的射流环此影响尤为明显。
The oxidation reactor is the key equipment in titanium dioxide powder production by chloride process,and the properties of titanium dioxide powder depend strongly on the mixing characters of the gases feeding into the reactor.The process of jet mixing in the reactor was studied with tracer technique and the effects of the opening structure on the wall of the feed ring and the momentum ratio to the jet mixing were analyzed.The results indicate that the main factor affecting the mixing is the opening structure,and the complex opening structure is better than the uniform opening structure.Increasing the momentum ratio is profitable to mixing operation,but it is more efficient to those jet rings with smaller openings.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心