详细信息

Evaluation of stress corrosion cracking susceptibility of nanocrystallized stainless steel 304L welded joint by small punch test  ( SCI-EXPANDED收录 EI收录)  

文献类型:期刊文献

英文题名:Evaluation of stress corrosion cracking susceptibility of nanocrystallized stainless steel 304L welded joint by small punch test

作者:Bai, Tao[1];Guan, Kaishu[1]

机构:[1]E China Univ Sci & Technol, Key Lab Safety Sci Pressurized Syst, Minist Educ, Sch Mech & Power Engn, Shanghai 200237, Peoples R China

年份:2013

卷号:52

起止页码:849

外文期刊名:MATERIALS & DESIGN

收录:;EI(收录号:20133016536945);WOS:【SCI-EXPANDED(收录号:WOS:000323832200100)】;

基金:The authors gratefully acknowledge the financial support provided by National Nature Science Foundation of China (Grant No. 51075148) and the State Bureau of Quality and Technical Supervision of China (200810405 and 201110029).

语种:英文

外文关键词:Stainless steel 304L; Weld seam; Heat affected zone; Surface mechanical attrition treatment; Small punch test; Stress corrosion cracking

摘要:A small punch test (SPT) was carried out to evaluate the stress corrosion cracking (SCC) susceptibility of nanocrystallized stainless steel (SS) 304L welded joint in 1 mol/L NaCl + 0.5 mol/L HCl aq. The surface mechanical attrition treatment (SMAT) was applied to realize the surface naocrystallization (SNC). Mechanical properties and micro-structural evolutions of S nanocrystallized SS 304L welded joint were investigated through optical microscopy (OM), X-ray diffraction (XRD), micro-Vickers hardness test and transmission electron microscopy (TEM). The SPT was conducted in both ambient air and corrosive solution at the loading rate 3 x 10(-3) mm/min, and SNC phenomena were observed at the welded seam (WS) and heat affected zone (HAZ) after SMAT. The results show that for both HAZ and WS materials, specimens with 30 min SMAT have higher hardness, higher yield strength, and lower ductility than the as-received counterparts in ambient air. After SPT in the corrosive solution, the as-received HAZ specimen showed a mixed type of both the intergranular SCC (IGSCC) and transgranular cleavage fracture; The SMAT sample shows a typical intergranular stress corrosion cracking (IGSCC) mode with a higher SCC susceptibility. Neither the as-received nor the SMAT WS specimen showed significant SCC susceptibility, they had the similar fractures with their counterparts in ambient air. (C) 2013 Elsevier Ltd. All rights reserved.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心