文献类型：期刊文献

中文题名：高转化率乳聚丁苯橡胶聚合过程中乳液相对分子质量分布与粒径分布考察

英文题名：Molecular weight and particle size distribution of latex in the process of emulsion polymerization for styrene butadiene rubber with high monomer conversion

作者：金彦江[1,2];沈本贤[1];隋军[2];崔明海[1];杨磊[2];赵基钢[1]

机构：[1]华东理工大学化学工程联合国家重点实验室,上海200237;[2]中国石油吉林石化公司,吉林吉林132021

年份：2011

卷号：21

期号：4

起止页码：37

中文期刊名：弹性体

外文期刊名：China Elastomerics

收录：CSTPCD;;北大核心:【北大核心2008】；

基金：吉林石化公司重点项目;吉林石化公司与华东理工大学产学研合作项目

语种：中文

中文关键词：相对分子质量分布;粒径分布;乳液聚合;丁苯橡胶

外文关键词：molecular weight distribution; particle size distribution; emulsion polymerization; styrene butadiene rubber

摘要：采用中石油吉化分公司乳聚丁苯橡胶高转化率大生产配方,考察了实验室聚合反应釜聚合反应单体转化率随反应时间的变化,采用激光粒度分析仪和凝胶渗透色谱仪测定了聚合反应不同单体转化率的胶乳的粒径分布与分子质量分布,结果表明:胶乳粒径呈正态分布,粒径主要集中分布在0.1μm附近,胶乳的平均粒径随反应时间的延长逐渐增大,但是增加的幅度越来越小;聚合反应时间在11 h前(即转化率小于72%),胶乳的重均分子质量、Z均分子质量一直增大,而数均分子质量变化无明显规律;而分子质量分布宽度指数随反应的进行变小,表明调整的高转化率配方合成的丁苯橡胶可有效改善聚合生成的胶乳粒径分布。
The monomer conversion of styrene butadiene rubber polymerization was studied by a lab scale autocalve with the large-scale production recipe of high conversion for styrene butadiene rubber in Jilin Petrochemical Company.The molecular weight and particle size distributions of latex in the process of emulsion polymerization for styrene butadiene rubber with high monomer conversion were determined by laser particle size analyzer and gel permeation chromatography.The results showed that：the particle size distribution of latex is Gaussian distribution.The particle size is mainly in the vicinity of 0.1 microns,the average particle size of latex increases with increasing polymerization time,while the increasing rate is less and less.When the polymerization time was less than 11 hours（the monomer conversion was less than 72%）,the weight average molecular weight and Z average molecular weight of latex increased with increasing the polymerization time.The molecular weight distribution breadth index decreases with increasing the reaction time.It indicated that the styrene butadiene rubber by high conversion recipe by adjusted can effectively improve the polymerization of the latex particle size distribution.