文献类型：期刊文献

中文题名：制备工艺对ATO纳米棒形貌结构的影响

英文题名：Effects of Preparing Process on the Morphology and Structure of ATO Nanorods

作者：胡勇[1];陈国建[1];陈雪梅[1];於定华[1];曹宏明[1];吴秋芳[1]

机构：[1]华东理工大学国家超细粉末工程研究中心,上海200237

年份：2004

卷号：45

期号：8

起止页码：395

中文期刊名：化学世界

外文期刊名：Chemical World

收录：北大核心:【北大核心2000】；CSCD:【CSCD2011_2012】；

基金：上海市科技发展基金项目(027252034)

语种：中文

中文关键词：ATO纳米棒;化学共沉淀;形貌;导电材料

外文关键词：ATO nanorods; chemical coprecipitation; morphology; conductive materials

摘要：以SnCl4·5H2O和SbCl3为原料,采用化学共沉淀法成功制备了高含量棒状纳米级掺锑二氧化锡(ATO)导电粉体,研究了掺锑量、热处理温度及热处理时间对纳米棒形貌结构的影响。初步探讨了ATO纳米棒的形成机理,并用热重分析(TG)、透射电镜(TEM)、X-射线衍射(XRD)、比表面法(BET)对棒结构进行了表征。
A high yield of conductive ATO(antimony-doped tin dioxide) nanorods was successfully achieved by chemical coprecipitation method using SnCl_4·5H_2O and SbCl_3 as raw materials. Effects of processing parameters such as antimony content, heating temperature and heating time on the morphology and structure of ATO nanorods were investigated. The mechanism of the formation of ATO nanorods was discussed. Thermogravimetric analysis (TG), transmission electron microscope (TEM). X-ray diffraction (XRD) and BET method were used for characterization of ATO nanorods.