文献类型：期刊文献

中文题名：SrAl2O4：Eu^2＋,Dy^3＋荧光粉复合硫磷酸盐玻璃制备及其发光性能

英文题名：Synthesis and Luminescent Properties of SrAl_2O_4:Eu^(2+),Dy^(3+) Phosphor/Sulfophosphate Glass Composite

作者：吴玄顺[1];曾惠丹[1];袁双龙[1];杨一凡[1];任晶[1];陈国荣[1]

机构：[1]华东理工大学材料科学与工程学院,超细材料制备与应用教育部重点实验室,上海200237

年份：2012

卷号：30

期号：1

起止页码：50

中文期刊名：材料科学与工程学报

外文期刊名：Journal of Materials Science and Engineering

收录：CSTPCD;;北大核心:【北大核心2011】；CSCD:【CSCD2011_2012】；

基金：中央高校基本科研业务费专项资金资助项目(WD1014035)

语种：中文

中文关键词：硫磷酸盐玻璃;低熔点;SrAl2O4:Eu2+,Dy3+

外文关键词：sulfophosphate glass; low melting point; SrAl2O4：Eu2＋; Dy3＋

摘要：用二次熔融法制备了SrAl2O4∶Eu2+,Dy3+荧光粉掺杂低熔点硫磷酸盐的发光玻璃复合材料。采用DSC、透射光谱、XRD、发射光谱、SEM等测试手段对样品进行了表征。研究了熔制温度、熔制时间等因素对复合材料光学性能的影响。结果表明:熔制温度为700℃、熔制时间为30min的发光玻璃复合材料在365nm紫外光激发下,发射出峰值波长为514nm的黄绿光,保留了荧光粉的发光性能。
Low melting sulfophosphate glass/SrAl2O4： Eu2＋,Dy3＋ phosphor composites were prepared by two-step melting method.The samples were characterized by differential scanning calorimetry（DSC）,transmittance spectra,X-ray diffractometry（XRD）,emission spectra,scanning electron microscopy（SEM）,etc.The effects of synthetic conditions（melting temperature,duration of reaction time） on luminescent properties of the composite samples were investigated.The experimental results show that the optimized composite（melting temperature 700℃,melting time 30min） emits strong yellow-green light when it is excited by 365 nm ultraviolet light,and maintains the luminescent properties of the phosphor.