文献类型：期刊文献

中文题名：310S和AL-6XN不锈钢在熔融MgCl_2中的腐蚀行为

英文题名：Corrision Behavior of 310S and AL-6XN Steels in Molten MgCl_2

作者：俞进进[1];路贵民[1];尚淑珍[2];于建国[1]

机构：[1]华东理工大学资源与环境工程学院,上海200237;[2]华东理工大学机械与动力工程学院,上海200237

年份：2011

卷号：32

期号：1

起止页码：12

中文期刊名：腐蚀与防护

外文期刊名：Corrosion & Protection

收录：CSTPCD;;Scopus;北大核心:【北大核心2008】；

基金：国家863计划重点项目(No.2009AA06Z102)

语种：中文

中文关键词：熔盐;热腐蚀;奥氏体不锈钢

外文关键词：molten salt; hot corrosiom austenitic stainless steel

摘要：研究了310S和AL-6XN两种不锈钢在800℃下MgCl_2熔盐中的腐蚀行为,采用X射线衍射仪(XRD)和金相显微镜对腐蚀产物和截面形貌进行了分析。结果表明,两者都为均匀腐蚀,310S初始腐蚀速率比AL-6XN大很多,之后两者均慢慢减小并趋近于零。由腐蚀深度得到前者腐蚀等级为9级,后者为8级,都属于欠耐蚀。在800℃下,两种材料腐蚀过程符合三维扩散(Ginstring-Brounshtein)反应动力学模型,反应常数分别是0.0048和0.0081,并得到他们的动力学方程。在MgCl_2熔盐中AL-6XN比310S的耐腐蚀性能更好。
The corrosion behaviors of 310S and AL-6XN steels in MgC12 molten salts were studied. The corrosion products and cross-section were amalyzed by means of X-ray diffraction （XRD） and metallurgical microscopy. Both steels showed uniform corrosion. 310S had a higher initial corrosion rate than AL-6XN. The corrosion rate of both steels was slowed down and trended to zero afterward. According to the corrosion depth, corrosion grades of 310S and AL-6XN were classified as 9 and 8 respectively, indicating insufficient corrosion resistance. These two corrosion processes belonged to 3D diffusion （Ginstring-Brounshtein） kinetic model. The reaction constants were 0. 0048 and 0. 0081 respectively, and the kinetic equations were obtained. AL-6XN showed better corrosion resistance than 310S in MgCl2 molten salts.